diff options
Diffstat (limited to '2024/captions')
3 files changed, 460 insertions, 460 deletions
diff --git a/2024/captions/emacsconf-2024-emacs30--emacs-30-highlights--philip-kaludercic--main--chapters.vtt b/2024/captions/emacsconf-2024-emacs30--emacs-30-highlights--philip-kaludercic--main--chapters.vtt index 89190453..57ef14d3 100644 --- a/2024/captions/emacsconf-2024-emacs30--emacs-30-highlights--philip-kaludercic--main--chapters.vtt +++ b/2024/captions/emacsconf-2024-emacs30--emacs-30-highlights--philip-kaludercic--main--chapters.vtt @@ -1,35 +1,35 @@ WEBVTT -00:00:00.000 --> 00:01:41.800 +00:00:00.000 --> 00:01:41.759 Introduction -00:01:41.800 --> 00:07:45.719 +00:01:41.760 --> 00:07:44.699 Android -00:07:45.720 --> 00:09:27.320 +00:07:44.700 --> 00:09:30.239 EditorConfig -00:09:27.310 --> 00:13:11.559 +00:09:30.240 --> 00:13:11.399 use-package integration with package-vc -00:13:11.560 --> 00:15:56.679 +00:13:11.400 --> 00:15:56.839 JSON -00:15:56.680 --> 00:17:29.639 +00:15:56.840 --> 00:17:30.719 Native compilation -00:17:29.640 --> 00:18:16.779 +00:17:30.720 --> 00:18:16.819 Tree-sitter -00:18:16.780 --> 00:19:34.200 +00:18:16.820 --> 00:19:34.219 Completion preview mode -00:19:34.233 --> 00:21:16.919 +00:19:34.220 --> 00:21:16.779 package-isolate -00:21:16.920 --> 00:23:17.939 +00:21:16.780 --> 00:23:17.879 Reindenting -00:23:17.940 --> 00:24:43.766 +00:23:17.880 --> 00:24:43.120 Wrapping up diff --git a/2024/captions/emacsconf-2024-emacs30--emacs-30-highlights--philip-kaludercic--main.vtt b/2024/captions/emacsconf-2024-emacs30--emacs-30-highlights--philip-kaludercic--main.vtt index f0d08f0b..feebc2ed 100644 --- a/2024/captions/emacsconf-2024-emacs30--emacs-30-highlights--philip-kaludercic--main.vtt +++ b/2024/captions/emacsconf-2024-emacs30--emacs-30-highlights--philip-kaludercic--main.vtt @@ -1,1361 +1,1361 @@ -WEBVTT captioned by anush and sachac, checked by anush and bhavin +WEBVTT captioned by anush NOTE Introduction -00:00.000 --> 00:06.066 +00:00:00.000 --> 00:00:06.119 Hello, and welcome to Emacs 30 Highlights at EmacsConf 2024. -00:06.100 --> 00:08.833 +00:00:06.120 --> 00:00:08.839 Before I begin, I'd like to thank the organizers -00:08.866 --> 00:11.800 +00:00:08.840 --> 00:00:11.799 and everyone involved for putting this all together. -00:11.800 --> 00:13.733 +00:00:11.800 --> 00:00:13.759 While this talk is being pre-recorded, -00:13.766 --> 00:15.233 +00:00:13.760 --> 00:00:15.239 my experience from the last few years -00:15.266 --> 00:19.100 +00:00:15.240 --> 00:00:19.159 assures me that it will be a great experience for everyone. -00:19.133 --> 00:21.300 +00:00:19.160 --> 00:00:21.359 My name is Philip Kaludercic. -00:21.333 --> 00:24.466 +00:00:21.360 --> 00:00:24.479 I am a core contributor and ELPA co-maintainer. -00:24.500 --> 00:26.066 +00:00:24.480 --> 00:00:26.079 I was honored when Sacha asked me -00:26.100 --> 00:28.333 +00:00:26.080 --> 00:00:28.359 to take over the slot for this year. -00:28.366 --> 00:29.866 +00:00:28.360 --> 00:00:29.879 In the past few iterations, -00:29.900 --> 00:32.133 +00:00:29.880 --> 00:00:32.199 John Wiegley has filled a similar presentation -00:32.166 --> 00:35.666 +00:00:32.200 --> 00:00:35.679 focusing on more general Emacs development updates. -00:35.700 --> 00:00:38.501 +00:00:35.680 --> 00:00:38.519 This year, I will specifically focus on -00:00:38.502 --> 00:00:41.900 +00:00:38.520 --> 00:00:41.919 highlight features from the upcoming Emacs 30 release, -00:41.933 --> 00:44.200 +00:00:41.920 --> 00:00:43.919 which might or might not have been released -00:44.200 --> 00:00:48.059 +00:00:43.920 --> 00:00:48.079 by the time you are seeing this. -00:00:48.060 --> 00:51.266 +00:00:48.080 --> 00:00:51.079 As you can imagine, everything new about Emacs -00:51.300 --> 00:55.133 +00:00:51.080 --> 00:00:55.059 can always be found in the Emacs NEWS file. -00:55.166 --> 00:57.100 +00:00:55.060 --> 00:00:57.079 Or, alternatively, -00:57.133 --> 01:01.800 +00:00:57.080 --> 00:01:01.919 if one doesn't want to read through the 3,000 lines here, -01:01.800 --> 01:05.233 +00:01:01.920 --> 00:01:05.279 one can also take a look at the Emacs FAQ -01:05.266 --> 01:08.000 +00:01:05.280 --> 00:01:07.999 and then go to the what's new about -01:08.000 --> 01:12.300 +00:01:08.000 --> 00:01:12.219 or what's different about Emacs 30 node. -01:12.333 --> 01:14.700 +00:01:12.220 --> 00:01:14.759 Next to these two official options, -01:14.733 --> 01:18.200 +00:01:14.760 --> 00:01:18.599 I also have a page on Emacs Wiki -01:18.200 --> 01:21.300 +00:01:18.600 --> 00:01:21.439 called EmacsThirtyHighlights, -01:21.333 --> 01:24.266 +00:01:21.440 --> 00:01:24.279 highlighting some of the interesting features -01:24.300 --> 01:28.433 +00:01:24.280 --> 00:01:28.439 with some context and suggestions on how to try them out. -01:28.466 --> 01:30.033 +00:01:28.440 --> 00:01:30.039 This is more of a collaborative effort. -01:30.066 --> 01:32.733 +00:01:30.040 --> 00:01:32.719 So if you see this and think something is missing, -01:32.766 --> 01:34.500 +00:01:32.720 --> 00:01:34.519 feel free to add it. -01:34.533 --> 01:36.833 +00:01:34.520 --> 00:01:36.839 So without further ado, -01:36.866 --> 01:41.800 +00:01:36.840 --> 00:01:41.759 let's begin taking a look at new features in Emacs 30. NOTE Android -01:41.800 --> 01:44.700 +00:01:41.760 --> 00:01:44.679 The biggest one, and the one I want to mention first, -01:44.733 --> 01:49.033 +00:01:44.680 --> 00:01:49.039 is Android support, native Android support. -01:49.066 --> 01:51.833 +00:01:49.040 --> 00:01:51.879 As you can see here, Emacs has been ported -01:51.866 --> 01:53.666 +00:01:51.880 --> 00:01:53.639 to the Android operating system. -01:53.700 --> 01:56.500 +00:01:53.640 --> 00:01:56.479 What this means is that from Emacs 30 onwards, -01:56.533 --> 02:01.066 +00:01:56.480 --> 00:02:01.279 you can build Android to target Android devices natively -02:01.100 --> 02:06.733 +00:02:01.280 --> 00:02:06.759 and using a graphical interface. -02:06.766 --> 02:08.433 +00:02:06.760 --> 00:02:08.799 While it has been possible to run Emacs -02:08.466 --> 02:11.133 +00:02:08.800 --> 00:02:11.159 inside of terminal emulators on Android for a while, -02:11.166 --> 02:13.900 +00:02:11.160 --> 00:02:13.919 this actually means that you can use Emacs -02:13.933 --> 02:17.533 +00:02:13.920 --> 00:02:17.519 on an Android device, a phone or a tablet, -02:17.566 --> 02:20.933 +00:02:17.520 --> 00:02:20.959 and have all the usual advantages from GUI Emacs, -02:20.966 --> 02:23.466 +00:02:20.960 --> 00:02:23.479 such as the ability to bind all commands -02:23.500 --> 02:25.466 +00:02:23.480 --> 00:02:25.479 without having to worry about-- -02:25.500 --> 02:27.266 +00:02:25.480 --> 00:02:27.279 all keys without having to worry -02:27.300 --> 02:29.033 +00:02:27.280 --> 00:02:29.359 about terminal compatibility issues, -02:29.066 --> 02:32.733 +00:02:29.360 --> 00:02:32.759 displaying images and multiple fonts -02:32.766 --> 02:35.333 +00:02:32.760 --> 00:02:35.359 on the same display of different sizes. -02:35.366 --> 02:37.300 +00:02:35.360 --> 00:02:37.279 I should have a recording -02:37.333 --> 02:42.200 +00:02:37.280 --> 00:02:42.199 of that somewhere here--here we are-- -02:42.200 --> 02:44.100 +00:02:42.200 --> 00:02:44.439 which I made earlier on my phone, -02:44.133 --> 02:47.266 +00:02:44.440 --> 00:02:47.319 because I'm recording this on a laptop-- -02:47.300 --> 02:50.466 +00:02:47.320 --> 00:02:50.479 where we can see how touch interaction works -02:50.500 --> 02:53.333 +00:02:50.480 --> 00:02:53.199 on an Android phone. I can switch between buffers. -02:53.366 --> 02:56.100 +00:02:53.200 --> 00:02:56.119 Here I've connected an external keyboard, -02:56.133 --> 02:57.800 +00:02:56.120 --> 00:02:58.559 opening the Emacs website. -02:57.800 --> 00:03:02.559 +00:02:58.560 --> 00:03:02.679 We have images that we can interact with. -00:03:02.560 --> 00:03:04.319 +00:03:02.680 --> 00:03:05.319 We could resize them if we wanted to -00:03:04.320 --> 03:07.400 +00:03:05.320 --> 00:03:07.559 with the image resizing commands. -03:07.400 --> 03:10.300 +00:03:07.560 --> 00:03:10.359 Pinch-to-zoom works, so it -03:10.333 --> 03:12.733 +00:03:10.360 --> 00:03:12.759 does realize what touchscreen interactions are. -03:12.766 --> 03:15.233 +00:03:12.760 --> 00:03:15.239 With an external mouse, and for example, -03:15.266 --> 03:17.800 +00:03:15.240 --> 00:03:17.799 enabling context menu mode, -03:17.800 --> 03:23.066 +00:03:17.800 --> 00:03:22.679 I can even pop up little interaction windows, -03:23.100 --> 00:03:28.139 +00:03:22.680 --> 00:03:27.239 which one you would usually also know from GUI Emacs. -00:03:28.140 --> 03:33.200 +00:03:27.240 --> 00:03:32.959 TUI Emacs actually also supports them since a while now. -03:33.200 --> 03:34.600 +00:03:32.960 --> 00:03:34.639 And in this case, I'm demonstrating -03:34.600 --> 03:36.000 +00:03:34.640 --> 00:03:35.999 how even the touchscreen events -03:36.000 --> 03:39.133 +00:03:36.000 --> 00:03:39.119 can be inspected using the usual help system, -03:39.166 --> 03:43.333 +00:03:39.120 --> 00:03:43.359 and how context-mode notices -03:43.366 --> 03:45.200 +00:03:43.360 --> 00:03:45.239 where we are and allows me to, for example, -03:45.200 --> 03:47.800 +00:03:45.240 --> 00:03:47.799 evaluate this specific region, -03:47.800 --> 03:49.300 +00:03:47.800 --> 00:03:49.079 which I've highlighted down there, -03:49.333 --> 03:58.300 +00:03:49.080 --> 00:03:58.319 binding a command to touch-screen-scroll. Yeah. -03:58.333 --> 04:00.533 +00:03:58.320 --> 00:04:00.479 One should note that these additions, -04:00.566 --> 04:02.400 +00:04:00.480 --> 00:04:02.359 for example touchscreen interaction, -04:02.400 --> 04:03.833 +00:04:02.360 --> 00:04:04.159 are not specific to Android, -04:03.866 --> 04:07.066 +00:04:04.160 --> 00:04:06.839 but they also are supported in other operating systems, -04:07.100 --> 04:12.200 +00:04:06.840 --> 00:04:12.279 such as Wayland and Xorg, which are not operating systems, -04:12.200 --> 04:15.300 +00:04:12.280 --> 00:04:15.279 and Windows, insofar as they have touchscreen, -04:15.333 --> 00:04:18.419 +00:04:15.280 --> 00:04:18.419 and devices have touchscreen support. -00:04:18.420 --> 04:21.300 +00:04:18.420 --> 00:04:21.239 One should mention, or I want to mention, -04:21.333 --> 04:24.666 +00:04:21.240 --> 00:04:24.039 that the main developer behind this feature, Po Lu, -04:24.700 --> 04:27.500 +00:04:24.040 --> 00:04:27.319 should be complimented for the additional effort he put -04:27.533 --> 00:04:31.019 +00:04:27.320 --> 00:04:30.979 into making sure that Emacs for Android -00:04:31.020 --> 04:34.133 +00:04:30.980 --> 00:04:33.719 can be built using only a free software toolchain, -04:34.166 --> 00:04:36.359 +00:04:33.720 --> 00:04:36.999 which is certainly not something one has come to expect -00:04:36.360 --> 04:40.700 +00:04:37.000 --> 00:04:40.759 from working on Android applications, -04:40.733 --> 04:43.833 +00:04:40.760 --> 00:04:43.839 as usually you have to agree to some terms and conditions -04:43.866 --> 00:04:46.519 +00:04:43.840 --> 00:04:46.479 for Google-specific software. -00:04:46.520 --> 04:49.633 +00:04:46.480 --> 00:04:49.639 Final note is that if you try and look for this online, -04:49.666 --> 04:52.133 +00:04:49.640 --> 00:04:52.119 there are APKs you can find, -04:52.166 --> 04:54.666 +00:04:52.120 --> 00:04:54.679 but some of them might be outdated. -04:54.700 --> 04:59.333 +00:04:54.680 --> 00:04:59.359 To the best of my knowledge, Po Lu has... -04:59.366 --> 05:03.400 +00:04:59.360 --> 00:05:02.399 Emacs 30 Android Sourceforge... -05:03.400 --> 05:06.500 +00:05:02.400 --> 00:05:06.759 He has set up some system where here in Sourceforge, -05:06.533 --> 05:12.433 +00:05:06.760 --> 00:05:12.799 there are regular and updated -05:12.466 --> 05:14.500 +00:05:12.800 --> 00:05:14.519 APK files which you can download -05:14.533 --> 05:16.933 +00:05:14.520 --> 00:05:17.039 to avoid having to build it yourself, -05:16.966 --> 05:18.866 +00:05:17.040 --> 00:05:18.559 testing out the newest version -05:18.900 --> 05:24.133 +00:05:18.560 --> 00:05:27.619 in case there are some bugs which you'd like to report. -05:24.166 --> 05:33.100 +00:05:27.620 --> 00:05:33.119 Which-key is a package which has now been moved -05:33.133 --> 05:35.266 +00:05:33.120 --> 00:05:34.719 from ELPA to the core. -05:35.300 --> 00:05:39.179 +00:05:34.720 --> 00:05:38.879 If you haven't heard of which-key before, the idea is, -00:05:39.180 --> 05:41.633 +00:05:38.880 --> 00:05:41.399 or the general pitch is that which-key -05:41.666 --> 05:45.233 +00:05:41.400 --> 00:05:45.279 is a additional documentation interface for Emacs -05:45.266 --> 05:49.700 +00:05:45.280 --> 00:05:49.639 for displaying various keys which you could input, -05:49.733 --> 00:05:53.439 +00:05:49.640 --> 00:05:53.479 or various keys and key maps -00:05:53.440 --> 05:54.833 +00:05:53.480 --> 00:05:55.479 that have been partially inputted. -05:54.866 --> 05:57.633 +00:05:55.480 --> 00:05:57.639 A better way to demonstrate this -05:57.666 --> 05:59.300 +00:05:57.640 --> 00:05:59.319 or to explain this is just to show it. -05:59.333 --> 06:03.466 +00:05:59.320 --> 00:06:03.519 If we enable the which-key mode--it's a global minor mode-- -06:03.500 --> 06:06.333 +00:06:03.520 --> 00:06:06.399 then I can press, for example, C-x, -06:06.366 --> 06:08.700 +00:06:06.400 --> 00:06:08.719 which is a prefix for the C-x keymap. -06:08.733 --> 06:12.433 +00:06:08.720 --> 00:06:11.719 Then down here in the buffer, in this window down here, -06:12.466 --> 06:15.333 +00:06:11.720 --> 00:06:15.599 we see various commands which we could invoke -06:15.366 --> 06:17.900 +00:06:15.600 --> 00:06:17.919 and the keys to invoke them with. -06:17.933 --> 06:23.000 +00:06:17.920 --> 00:06:23.039 For example, if I wanted to say C-x i for insert-file, -06:23.000 --> 06:27.233 +00:06:23.040 --> 00:06:27.319 then I just have to press i to highlight it once again. -06:27.266 --> 06:32.600 +00:06:27.320 --> 00:06:32.559 It should be down here. Pressing i without having to repeat -06:32.600 --> 06:34.733 +00:06:32.560 --> 00:06:34.759 the entire key code again, -06:34.766 --> 06:37.200 +00:06:34.760 --> 00:06:37.719 the partial key code again, just works. -06:37.200 --> 06:41.533 +00:06:37.720 --> 00:06:41.679 This is different from the feature which Emacs has already, -06:41.566 --> 06:45.400 +00:06:41.680 --> 00:06:45.519 which is if you have input the partial keychord, -06:45.400 --> 06:47.033 +00:06:45.520 --> 00:06:47.039 you can press C-h -06:47.066 --> 06:51.000 +00:06:47.040 --> 00:06:50.959 and then a help buffer pops up with a listing -06:51.000 --> 06:54.066 +00:06:50.960 --> 00:06:54.159 of all keybindings that start with C-x. -06:54.100 --> 06:56.633 +00:06:54.160 --> 00:06:56.639 The information is the same, the presentation is different, -06:56.666 --> 06:59.066 +00:06:56.640 --> 00:06:59.159 because now if I wanted to do C-x i, -06:59.100 --> 00:07:03.339 +00:06:59.160 --> 00:07:03.319 I have to repeat the entire keychord again. -00:07:03.340 --> 07:09.466 +00:07:03.320 --> 00:07:09.479 So it's a matter of personal preference, which you prefer. -07:09.500 --> 00:07:10.959 +00:07:09.480 --> 00:07:12.519 This is more of a traditional static approach -00:07:10.960 --> 07:19.633 +00:07:12.520 --> 00:07:19.639 because I get a help buffer which I can search -07:19.666 --> 07:20.900 +00:07:19.640 --> 00:07:21.119 using usual key commands, -07:20.933 --> 07:28.133 +00:07:21.120 --> 00:07:28.159 while which-key is more of a transient and modern. -07:28.166 --> 07:31.400 +00:07:28.160 --> 00:07:31.299 Some might prefer that approach -07:31.400 --> 00:07:35.719 +00:07:31.300 --> 00:07:35.519 to solving the same problem. -00:07:35.720 --> 07:39.100 +00:07:35.520 --> 00:07:39.119 Also, don't forget to check out the customization group -07:39.133 --> 07:41.933 +00:07:39.120 --> 00:07:41.959 for which-key which has a number of options -07:41.966 --> 00:07:45.719 +00:07:41.960 --> 00:07:44.699 which you might or might not be interested in. NOTE EditorConfig -00:07:45.720 --> 07:50.866 +00:07:44.700 --> 00:07:50.879 Next up, Emacs 30 has built-in EditorConfig support. -07:50.900 --> 07:53.633 +00:07:50.880 --> 00:07:53.679 If you have not heard of EditorConfig before, -07:53.666 --> 00:07:56.639 +00:07:53.680 --> 00:07:56.379 I believe I've linked to it down here somewhere. -00:07:56.640 --> 00:08:00.119 +00:07:56.380 --> 00:08:00.160 Ah, there it is, EditorConfig. -00:08:00.120 --> 00:08:09.419 +00:08:00.161 --> 00:08:05.260 This is a file format used to specify -00:08:09.420 --> 08:12.133 +00:08:05.261 --> 00:08:11.959 common formatting rules in an editor-agnostic way. -08:12.166 --> 08:16.266 +00:08:11.960 --> 00:08:16.319 You might compare it to .dir-locals.el files, -08:16.300 --> 08:19.333 +00:08:16.320 --> 00:08:19.159 which is a sort of an s-expression -08:19.366 --> 08:22.233 +00:08:19.160 --> 00:08:22.159 for setting file-local variables in Emacs. -08:22.266 --> 08:27.266 +00:08:22.160 --> 00:08:26.559 Of course, this is restricted to the common subset -08:27.300 --> 08:29.400 +00:08:26.560 --> 00:08:29.299 of what all editors should understand. -08:29.400 --> 08:31.833 +00:08:29.300 --> 00:08:31.839 For example, indentation styles, -08:31.866 --> 00:08:35.119 +00:08:31.840 --> 00:08:36.699 whether you prefer tabs or spaces, -00:08:35.120 --> 08:38.733 +00:08:36.700 --> 00:08:38.759 tab width, file encoding, and so on. -08:38.766 --> 00:08:43.919 +00:08:38.760 --> 00:08:43.959 So it's nothing too advanced, but it's something... -00:08:43.920 --> 08:48.500 +00:08:43.960 --> 00:08:48.559 It is a file format which one sees popping up more -08:48.533 --> 08:50.433 +00:08:48.560 --> 00:08:50.439 and more often in lots of projects -08:50.466 --> 08:53.600 +00:08:50.440 --> 00:08:53.479 which want to enforce a consistent indentation style -08:53.600 --> 08:56.633 +00:08:53.480 --> 00:08:56.639 or formatting rules for all editors in a project. -08:56.666 --> 09:00.200 +00:08:56.640 --> 00:09:00.159 Having this built in is certainly useful in Emacs. -09:00.200 --> 09:03.466 +00:09:00.160 --> 00:09:03.579 Though one should note that it's not enabled by default. -09:03.500 --> 00:09:10.939 +00:09:03.580 --> 00:09:11.039 You still have to enable the global minor mode, -00:09:10.940 --> 09:14.200 +00:09:11.040 --> 00:09:14.239 which is simply turning on this one option. -09:14.200 --> 09:15.500 +00:09:14.240 --> 00:09:15.599 Shouldn't be more than that, -09:15.533 --> 09:18.633 +00:09:15.600 --> 00:09:18.759 and then Emacs will respect the rules. -09:18.666 --> 00:09:23.640 +00:09:18.760 --> 00:09:22.999 If it finds a .editorconfig file in the project directory, -00:09:23.641 --> 00:09:25.320 +00:09:23.000 --> 00:09:25.319 then it will respect those rules -00:09:25.321 --> 00:09:27.320 +00:09:25.320 --> 00:09:30.239 without having to do anything else. NOTE use-package integration with package-vc -00:09:27.310 --> 00:09:33.567 +00:09:30.240 --> 00:09:34.599 Next up, use-package integration with package-vc. -00:09:33.568 --> 00:09:36.533 +00:09:34.600 --> 00:09:36.519 For those not familiar with either of the two, -00:09:36.534 --> 00:09:37.533 +00:09:36.520 --> 00:09:38.119 or at least one of the two, -00:09:37.534 --> 00:09:40.699 +00:09:38.120 --> 00:09:41.079 use-package is a popular configuration macro. -00:09:40.700 --> 00:09:42.833 +00:09:41.080 --> 00:09:43.119 What it does is it allows -00:09:42.866 --> 00:09:46.233 +00:09:43.120 --> 00:09:46.274 users to declaratively specify packages -00:09:46.266 --> 00:09:48.900 +00:09:46.275 --> 00:09:48.879 they would like to have installed and configured -00:09:48.900 --> 00:09:51.659 +00:09:48.880 --> 00:09:51.539 in their configuration file, -00:09:51.660 --> 00:09:54.400 +00:09:51.540 --> 00:09:54.359 so that, for example, if you copy your init.el -00:09:54.433 --> 00:09:55.900 +00:09:54.360 --> 00:09:55.959 from one system to another, -00:09:55.900 --> 00:09:58.500 +00:09:55.960 --> 00:09:58.519 it could bootstrap the entire configuration, -00:09:58.500 --> 00:10:00.733 +00:09:58.520 --> 00:10:00.719 downloading all the packages you want -00:10:00.766 --> 00:10:02.366 +00:10:00.720 --> 00:10:02.239 without having to manually do this -00:10:02.400 --> 00:10:05.139 +00:10:02.240 --> 00:10:05.039 on every system you'd like to use. -00:10:05.140 --> 00:10:07.600 +00:10:05.040 --> 00:10:07.559 This allows configurations -00:10:07.633 --> 00:10:10.859 +00:10:07.560 --> 00:10:11.039 to be self-encapsulated and portable. -00:10:10.860 --> 00:10:15.059 +00:10:11.040 --> 00:10:15.959 package-vc is an extension of package.el, -00:10:15.060 --> 00:10:19.400 +00:10:15.960 --> 00:10:19.679 which allows installing packages from an alternative. -00:10:19.433 --> 00:10:22.366 +00:10:19.680 --> 00:10:22.279 Instead of using the standard way to install packages, -00:10:22.400 --> 00:10:26.499 +00:10:22.280 --> 00:10:26.239 which is just download tarball and unpack it, -00:10:26.500 --> 00:10:27.933 +00:10:26.240 --> 00:10:28.359 byte compile, and so on, -00:10:27.966 --> 00:10:32.399 +00:10:28.360 --> 00:10:32.759 it will fetch the files for a package -00:10:32.400 --> 00:10:34.966 +00:10:32.760 --> 00:10:35.279 directly from the source code repository -00:10:35.000 --> 00:10:37.233 +00:10:35.280 --> 00:10:37.239 and initialize it in such a way -00:10:37.266 --> 00:10:38.800 +00:10:37.240 --> 00:10:39.119 that package.el can work with it. -00:10:38.833 --> 00:10:44.239 +00:10:39.120 --> 00:10:44.319 So it's just a front-end for installing packages. -00:10:44.240 --> 00:10:46.500 +00:10:44.320 --> 00:10:46.519 Even though these two were added to Emacs 29, -00:10:46.500 --> 00:10:48.366 +00:10:46.520 --> 00:10:48.399 we didn't have the time to work on the -00:10:48.400 --> 00:10:52.500 +00:10:48.400 --> 00:10:52.639 use-package integration of package-vc into use-package, -00:10:52.500 --> 00:10:54.600 +00:10:52.640 --> 00:10:55.359 which has been changed now. -00:10:54.633 --> 00:11:00.139 +00:10:55.360 --> 00:11:00.119 What we have with Emacs 30 is that -00:11:00.140 --> 00:11:02.833 +00:11:00.120 --> 00:11:02.839 there is a :vc keyword for use-package -00:11:02.866 --> 00:11:05.200 +00:11:02.840 --> 00:11:05.319 with which we can instruct use-package -00:11:05.233 --> 00:11:10.239 +00:11:05.320 --> 00:11:10.760 to not download a package using tarball, -00:11:10.240 --> 00:11:12.433 +00:11:10.774 --> 00:11:12.519 but instead to fetch the source code -00:11:12.466 --> 00:11:13.766 +00:11:12.520 --> 00:11:13.799 from a source code repository. -00:11:13.800 --> 00:11:15.566 +00:11:13.800 --> 00:11:15.919 This is useful if you, for example, -00:11:15.600 --> 00:11:18.200 +00:11:15.920 --> 00:11:18.319 have packages which you yourself work on -00:11:18.233 --> 00:11:19.933 +00:11:18.320 --> 00:11:19.959 and know that you always want to have -00:11:19.966 --> 00:11:21.900 +00:11:19.960 --> 00:11:21.919 the development version of the package -00:11:21.900 --> 00:11:26.819 +00:11:21.920 --> 00:11:26.639 where you can directly commit changes you've made -00:11:26.820 --> 00:11:29.733 +00:11:26.640 --> 00:11:29.159 to the repository and push them upstream. -00:11:29.766 --> 00:11:32.100 +00:11:29.160 --> 00:11:32.399 Or, if you know that you want to contribute to a package, -00:11:32.100 --> 00:11:34.966 +00:11:32.400 --> 00:11:35.559 you can use package-vc to download the source code, -00:11:35.000 --> 00:11:37.366 +00:11:35.560 --> 00:11:37.319 have all the version control information, -00:11:37.400 --> 00:11:41.739 +00:11:37.320 --> 00:11:41.759 prepare a patch and send it upstream. -00:11:41.740 --> 00:11:43.800 +00:11:41.760 --> 00:11:44.119 In these examples here, -00:11:43.833 --> 00:11:49.166 +00:11:44.120 --> 00:11:49.119 the first example Lisp instructs package-vc -00:11:49.200 --> 00:11:52.366 +00:11:49.120 --> 00:11:52.959 to download the source code from a URL. -00:11:52.400 --> 00:11:55.400 +00:11:52.960 --> 00:11:55.119 So this is a git URL where it will download -00:11:55.433 --> 00:11:57.400 +00:11:55.120 --> 00:11:57.399 the source code from, and in this case, -00:11:57.433 --> 00:12:00.000 +00:11:57.400 --> 00:12:00.399 choose the newest checkout of the source code, -00:12:00.033 --> 00:12:04.939 +00:12:00.400 --> 00:12:05.680 not the latest release. Down here, we have another example. -00:12:04.940 --> 00:12:08.766 +00:12:05.060 --> 00:12:09.159 I prefer to consider the following example here. -00:12:08.800 --> 00:12:10.733 +00:12:09.160 --> 00:12:10.879 If we just had written this, -00:12:10.766 --> 00:12:13.200 +00:12:10.880 --> 00:12:13.159 then package-vc would use the metadata -00:12:13.233 --> 00:12:15.000 +00:12:13.160 --> 00:12:16.279 which an ELPA server provides -00:12:15.033 --> 00:12:20.166 +00:12:16.280 --> 00:12:19.799 to fetch the URL from the official repository of, -00:12:20.200 --> 00:12:22.833 +00:12:19.800 --> 00:12:22.839 in this case, BBDB, without having to... -00:12:22.866 --> 00:12:27.733 +00:12:22.840 --> 00:12:28.239 It would be more or less the same like this up here, -00:12:27.766 --> 00:12:32.700 +00:12:28.240 --> 00:12:32.639 with the simple difference that package-vc integration -00:12:32.700 --> 00:12:36.300 +00:12:32.640 --> 00:12:36.359 into use-package doesn't check out the latest commit, -00:12:36.300 --> 00:12:37.766 +00:12:36.360 --> 00:12:38.359 but the latest release, -00:12:37.800 --> 00:12:44.979 +00:12:38.360 --> 00:12:44.159 just to keep configurations more deterministic by default. -00:12:44.980 --> 00:12:47.566 +00:12:44.160 --> 00:12:47.879 Of course, if you prefer to use latest commit, -00:12:47.600 --> 00:12:52.179 +00:12:47.880 --> 00:12:52.439 you can use a package-vc install command -00:12:52.180 --> 00:12:54.933 +00:12:52.440 --> 00:12:54.879 or just update the package manually yourself, -00:12:54.966 --> 00:13:01.779 +00:12:54.880 --> 00:13:01.739 which you can use using package-vc-upgrade. -00:13:01.780 --> 00:13:04.366 +00:13:01.740 --> 00:13:04.319 Next, I'd like to focus on a few features -00:13:04.400 --> 00:13:07.000 +00:13:04.320 --> 00:13:07.740 which one might not necessarily realize directly, -00:13:07.033 --> 00:13:11.559 +00:13:07.741 --> 00:13:11.399 but will hopefully improve your experience with Emacs. NOTE JSON -00:13:11.560 --> 00:13:15.133 +00:13:11.400 --> 00:13:15.119 First up in this list is a new JSON parser. -00:13:15.166 --> 00:13:21.959 +00:13:15.120 --> 00:13:21.399 Let's maybe show the source code for that one: -00:13:21.960 --> 00:13:39.533 +00:13:21.400 --> 00:13:39.319 not json.el, json.c. The history of JSON parsing in Emacs -00:13:39.566 --> 00:13:43.366 +00:13:39.320 --> 00:13:43.279 started with Emacs 23 with the addition of json.el. -00:13:43.400 --> 00:13:46.766 +00:13:43.280 --> 00:13:46.919 This was the file which we had just opened a moment ago. -00:13:46.800 --> 00:13:50.366 +00:13:46.920 --> 00:13:50.959 This is a JSON parser in Emacs Lisp. -00:13:50.400 --> 00:13:53.233 +00:13:50.960 --> 00:13:53.199 It's fine, it does the job, but it can get slow -00:13:53.266 --> 00:13:55.000 +00:13:53.200 --> 00:13:55.479 if we have a situation like where -00:13:55.033 --> 00:14:00.319 +00:13:55.480 --> 00:14:00.479 Eglot uses a LSP server to communicate with -00:14:00.320 --> 00:14:02.999 +00:14:00.480 --> 00:14:02.959 and the LSP server can get a bit chatty, -00:14:03.000 --> 00:14:05.133 +00:14:02.960 --> 00:14:05.479 sending a lot of JSON data, -00:14:05.166 --> 00:14:07.966 +00:14:05.480 --> 00:14:08.199 which all has to be parsed and garbage collected, -00:14:08.000 --> 00:14:09.933 +00:14:08.200 --> 00:14:10.199 which can slow down Emacs a bit. -00:14:09.966 --> 00:14:13.733 +00:14:10.200 --> 00:14:14.119 The situation was improved upon in Emacs 29 -00:14:13.766 --> 00:14:18.000 +00:14:14.120 --> 00:14:17.959 when JSON parsing was added to the core. -00:14:18.033 --> 00:14:21.000 +00:14:17.960 --> 00:14:21.039 This was the json.c file, which we see on this side, -00:14:21.033 --> 00:14:22.733 +00:14:21.040 --> 00:14:23.279 the old version of the json.c file, -00:14:22.766 --> 00:14:26.700 +00:14:23.280 --> 00:14:27.119 which employed the Jansson library (it's the C library) -00:14:26.700 --> 00:14:31.899 +00:14:27.120 --> 00:14:33.159 for parsing and accelerating JSON parsing in Emacs. -00:14:31.900 --> 00:14:33.966 +00:14:33.160 --> 00:14:33.999 This was good enough, -00:14:34.000 --> 00:14:36.200 +00:14:34.000 --> 00:14:36.159 or it certainly improved the situation -00:14:36.233 --> 00:14:38.300 +00:14:36.160 --> 00:14:38.559 for a lot of LSP clients. -00:14:38.300 --> 00:14:44.766 +00:14:38.560 --> 00:14:45.479 But in Emacs 30, the situation has been improved once more -00:14:44.800 --> 00:14:49.800 +00:14:45.480 --> 00:14:50.359 with the addition of a JSON parser directly in Emacs. -00:14:49.833 --> 00:14:53.566 +00:14:50.360 --> 00:14:52.999 So instead of using an external library, -00:14:53.600 --> 00:14:57.400 +00:14:53.000 --> 00:14:57.719 there's a custom JSON parser written in C in the Emacs core, -00:14:57.433 --> 00:15:01.539 +00:14:57.720 --> 00:15:01.559 which directly generates Elisp objects. -00:15:01.540 --> 00:15:05.033 +00:15:01.560 --> 00:15:04.999 The advantage to this approach -00:15:05.066 --> 00:15:06.433 +00:15:05.000 --> 00:15:06.359 compared to the Jansson approach -00:15:06.466 --> 00:15:07.933 +00:15:06.360 --> 00:15:07.919 is that there's no intermediate format -00:15:07.966 --> 00:15:09.200 +00:15:07.920 --> 00:15:09.199 which has to be allocated -00:15:09.233 --> 00:15:11.500 +00:15:09.200 --> 00:15:11.559 and memory managed and freed again, -00:15:11.500 --> 00:15:19.539 +00:15:11.560 --> 00:15:19.479 which of course incurs an additional performance overhead. -00:15:19.540 --> 00:15:22.433 +00:15:19.480 --> 00:15:22.659 Next to this, there's also a custom serializer -00:15:22.466 --> 00:15:29.239 +00:15:22.660 --> 00:15:27.119 for JSON contents translating a JSON object into a string. -00:15:29.240 --> 00:15:30.640 +00:15:27.120 --> 00:15:30.279 ... The consequence of this is that -00:15:30.641 --> 00:15:35.519 +00:15:30.280 --> 00:15:35.600 there is absolutely no dependency on Jansson anymore. -00:15:35.520 --> 00:15:38.533 +00:15:35.640 --> 00:15:38.559 This in turn means that now all Emacs users -00:15:38.566 --> 00:15:39.800 +00:15:38.560 --> 00:15:39.799 from Emacs 30 onwards -00:15:39.833 --> 00:15:42.733 +00:15:39.800 --> 00:15:43.119 can take advantage of this new JSON parser -00:15:42.766 --> 00:15:44.933 +00:15:43.120 --> 00:15:44.879 and don't have to worry about whether -00:15:44.966 --> 00:15:47.633 +00:15:44.880 --> 00:15:47.799 or not they have Jansson, this JSON parsing library, -00:15:47.666 --> 00:15:50.433 +00:15:47.800 --> 00:15:50.999 installed on their system or not when they want -00:15:50.466 --> 00:15:56.679 +00:15:51.000 --> 00:15:56.839 to take advantage of this accelerated JSON parsing. NOTE Native compilation -00:15:56.680 --> 00:16:00.366 +00:15:56.840 --> 00:16:00.639 Next up, another behind-the-scenes feature -00:16:00.400 --> 00:16:06.406 +00:16:00.640 --> 00:16:04.559 is that if you build Emacs on your own from source, -00:16:06.407 --> 00:16:07.766 +00:16:04.560 --> 00:16:07.879 you might know that if you wanted -00:16:07.800 --> 00:16:09.533 +00:16:07.880 --> 00:16:09.559 to use native compilation, -00:16:09.566 --> 00:16:12.379 +00:16:09.560 --> 00:16:12.319 so the translation of Elisp bytecodes -00:16:12.380 --> 00:16:15.533 +00:16:12.320 --> 00:16:15.559 to whatever the native assembly -00:16:15.566 --> 00:16:19.133 +00:16:15.560 --> 00:16:19.319 or native instruction set is on your system, -00:16:19.166 --> 00:16:24.339 +00:16:19.320 --> 00:16:24.359 you have to specify with native compilation. -00:16:24.340 --> 00:16:25.933 +00:16:24.360 --> 00:16:25.879 when invoking the configure script, -00:16:25.966 --> 00:16:28.366 +00:16:25.880 --> 00:16:28.879 otherwise it would not have been enabled at all. -00:16:28.400 --> 00:16:32.479 +00:16:28.880 --> 00:16:34.119 With Emacs 30, this step is not necessary anymore. -00:16:32.480 --> 00:16:36.233 +00:16:34.120 --> 00:16:36.719 The configure script will automatically check -00:16:36.266 --> 00:16:41.700 +00:16:36.720 --> 00:16:41.759 if you have the libgccjit library installed on your system, -00:16:41.700 --> 00:16:42.766 +00:16:41.760 --> 00:16:42.879 and if that is so, -00:16:42.800 --> 00:16:45.566 +00:16:42.880 --> 00:16:45.999 then native compilation will be enabled by default. -00:16:45.600 --> 00:16:49.400 +00:16:46.000 --> 00:16:49.559 In other words, if you have an issue with native compilation -00:16:49.433 --> 00:16:52.500 +00:16:49.560 --> 00:16:52.799 or prefer not to use it for whatever reason, -00:16:52.500 --> 00:16:55.533 +00:16:52.800 --> 00:16:55.559 you now have to type --without-native-compilation -00:16:55.566 --> 00:16:58.433 +00:16:55.560 --> 00:16:58.199 when compiling Emacs to prevent this from happening. -00:16:58.466 --> 00:17:02.433 +00:16:58.200 --> 00:17:02.279 But native compilation was added in Emacs 28 -00:17:02.466 --> 00:17:04.333 +00:17:02.280 --> 00:17:04.399 and has proven to be a very stable -00:17:04.366 --> 00:17:06.233 +00:17:04.400 --> 00:17:06.199 and useful feature for most people, -00:17:06.266 --> 00:17:09.400 +00:17:06.200 --> 00:17:10.199 so there's probably no reason to do this -00:17:09.433 --> 00:17:11.133 +00:17:10.200 --> 00:17:10.939 and you can just invoke the configure script -00:17:11.166 --> 00:17:16.300 +00:17:10.940 --> 00:17:16.239 with one argument less. Right, and I'd like to finish up -00:17:16.300 --> 00:17:19.500 +00:17:16.240 --> 00:17:19.399 with a few smaller features, a few smaller highlights. -00:17:19.500 --> 00:17:29.639 +00:17:19.400 --> 00:17:30.719 Maybe we can go back to the listing here. Here we have it. NOTE Tree-sitter -00:17:29.640 --> 00:17:32.833 +00:17:30.720 --> 00:17:32.839 There are a few new major modes -00:17:32.866 --> 00:17:34.333 +00:17:32.840 --> 00:17:34.239 based on the tree-sitter library. -00:17:34.366 --> 00:17:37.939 +00:17:34.240 --> 00:17:37.739 tree-sitter is this parser library -00:17:37.940 --> 00:17:39.933 +00:17:37.740 --> 00:17:42.879 which has been integrated into Emacs 29. -00:17:39.966 --> 00:17:44.100 +00:17:42.880 --> 00:17:44.079 It allows the integration -00:17:44.100 --> 00:17:48.400 +00:17:44.080 --> 00:17:48.359 of external, specialized, and quick parsers into Emacs, -00:17:48.433 --> 00:17:52.133 +00:17:48.360 --> 00:17:52.119 which improve stuff like syntax highlighting, indentation, -00:17:52.166 --> 00:17:55.233 +00:17:52.120 --> 00:17:55.279 structural navigation, imenu support, -00:17:55.266 --> 00:18:01.033 +00:17:55.280 --> 00:18:00.839 by simply having a better understanding of, for example, -00:18:01.066 --> 00:18:03.900 +00:18:00.840 --> 00:18:03.919 a HTML file, or a Lua file, a PHP file, -00:18:03.900 --> 00:18:06.233 +00:18:03.920 --> 00:18:06.239 than what people usually implement -00:18:06.266 --> 00:18:10.366 +00:18:06.240 --> 00:18:10.319 using regular expressions in traditional major modes. -00:18:10.400 --> 00:18:16.779 +00:18:10.320 --> 00:18:16.819 So, a few new major modes which you can try out here. NOTE Completion preview mode -00:18:16.780 --> 00:18:20.033 +00:18:16.820 --> 00:18:19.959 Another interesting feature is the completion-preview-mode. -00:18:20.066 --> 00:18:22.966 +00:18:19.960 --> 00:18:23.319 We can maybe try it out here in the scratch buffer. -00:18:23.000 --> 00:18:28.300 +00:18:23.320 --> 00:18:28.199 If I enable completion-preview-mode... -00:18:28.300 --> 00:18:32.033 +00:18:28.200 --> 00:18:32.719 This is a non-global minor mode, -00:18:32.066 --> 00:18:38.600 +00:18:32.720 --> 00:18:38.479 which will display completion options inline using overlays. -00:18:38.633 --> 00:18:43.133 +00:18:38.480 --> 00:18:43.199 For example, if I start typing a longer symbol like define, -00:18:43.166 --> 00:18:48.200 +00:18:43.200 --> 00:18:48.119 now we have a derived mode. It suggests me to... -00:18:48.233 --> 00:18:51.133 +00:18:48.120 --> 00:18:51.039 I can just press TAB and then it completes the option here, -00:18:51.166 --> 00:18:51.933 +00:18:51.040 --> 00:18:51.839 but it didn't actually... -00:18:51.966 --> 00:18:55.333 +00:18:51.840 --> 00:18:55.279 It's not actually modifying the buffer, it's not pressing, -00:18:55.366 --> 00:18:57.100 +00:18:55.280 --> 00:18:57.039 these are just overlays, -00:18:57.100 --> 00:18:59.533 +00:18:57.040 --> 00:18:59.519 so if I move around, it gets deleted. -00:18:59.566 --> 00:19:02.619 +00:18:59.520 --> 00:19:02.539 It wouldn't get saved if I were to save the buffer. -00:19:02.620 --> 00:19:04.966 +00:19:02.540 --> 00:19:04.999 The same also should work in a shell buffer. -00:19:05.000 --> 00:19:08.366 +00:19:05.000 --> 00:19:09.239 If I enable completion preview mode here and start... -00:19:08.400 --> 00:19:12.800 +00:19:09.240 --> 00:19:12.759 In this case, I'm using the bash completion package, -00:19:12.833 --> 00:19:15.000 +00:19:12.760 --> 00:19:15.199 which provides additional completion information. -00:19:15.033 --> 00:19:17.933 +00:19:15.200 --> 00:19:17.839 This is not only limited to programming systems, -00:19:17.966 --> 00:19:22.900 +00:19:17.840 --> 00:19:22.919 but anywhere where you have completion at point in Emacs. -00:19:22.900 --> 00:19:26.159 +00:19:22.920 --> 00:19:26.059 I can start typing here, ignore, and put ignore-backups, -00:19:26.160 --> 00:19:30.000 +00:19:26.060 --> 00:19:29.919 and it hints to the options which I have -00:19:30.033 --> 00:19:34.200 +00:19:29.920 --> 00:19:34.219 and allows me to complete them quickly. NOTE package-isolate -00:19:34.233 --> 00:19:37.966 +00:19:34.220 --> 00:19:37.879 Another small feature is the package-isolate command. -00:19:38.000 --> 00:19:40.000 +00:19:37.880 --> 00:19:39.959 What this does is it will start -00:19:40.033 --> 00:19:42.800 +00:19:39.960 --> 00:19:42.759 or it will prompt me for packages -00:19:42.833 --> 00:19:44.333 +00:19:42.760 --> 00:19:44.119 I have installed in my system -00:19:44.366 --> 00:19:46.500 +00:19:44.120 --> 00:19:46.439 and will start an isolated -00:19:46.500 --> 00:19:51.133 +00:19:46.440 --> 00:19:51.079 or like "emacs -Q"-ish instance of emacs -00:19:51.166 --> 00:19:53.333 +00:19:51.080 --> 00:19:53.639 with only these packages installed. -00:19:53.366 --> 00:20:00.439 +00:19:53.640 --> 00:20:00.279 So for example, if I said I want slime and I want diff-hl, -00:20:00.440 --> 00:20:02.700 +00:20:00.280 --> 00:20:02.279 then this is a new Emacs window. -00:20:02.700 --> 00:20:04.533 +00:20:02.280 --> 00:20:04.439 It's unrelated to the one around. -00:20:04.566 --> 00:20:06.500 +00:20:04.440 --> 00:20:06.839 It uses the same executable, of course, -00:20:06.500 --> 00:20:09.939 +00:20:06.840 --> 00:20:09.939 but will not load your configuration file -00:20:09.940 --> 00:20:13.679 +00:20:09.940 --> 00:20:13.619 or any other further customizations on your system. -00:20:13.680 --> 00:20:15.533 +00:20:13.620 --> 00:20:15.159 All it does, it will ensure -00:20:15.566 --> 00:20:17.933 +00:20:15.160 --> 00:20:17.919 that these packages, which are listed here, -00:20:17.966 --> 00:20:24.599 +00:20:17.920 --> 00:20:24.499 so in our case SLIME and dependencies of SLIME and diff-hl, -00:20:24.600 --> 00:20:25.300 +00:20:24.500 --> 00:20:25.239 in the system -00:20:25.300 --> 00:20:29.100 +00:20:25.240 --> 00:20:29.039 so that I could, for example, as you can see here, -00:20:29.100 --> 00:20:32.139 +00:20:29.040 --> 00:20:31.959 diff-hl-mode works. -00:20:32.140 --> 00:20:34.766 +00:20:31.960 --> 00:20:35.479 Okay, this is not a version-controlled file. -00:20:34.800 --> 00:20:41.200 +00:20:35.480 --> 00:20:41.119 Maybe if we take a look at, have I enabled diff-hl-mode? -00:20:41.233 --> 00:20:44.600 +00:20:41.120 --> 00:20:44.559 It's enabled in this case. What diff-hl-mode does -00:20:44.633 --> 00:20:48.300 +00:20:44.560 --> 00:20:48.479 is it displays these version control changes -00:20:48.300 --> 00:20:49.566 +00:20:48.480 --> 00:20:49.999 in the fringe of a buffer. -00:20:49.600 --> 00:20:54.133 +00:20:50.000 --> 00:20:54.079 And even though this is a uncustomized version of Emacs, -00:20:54.166 --> 00:20:56.333 +00:20:54.080 --> 00:20:56.319 or an uncustomized instance of Emacs, -00:20:56.366 --> 00:20:59.000 +00:20:56.320 --> 00:20:58.959 it was easy for me to load this one package, -00:20:59.033 --> 00:21:02.033 +00:20:58.960 --> 00:21:01.959 or these two packages and all the dependencies necessary. -00:21:02.066 --> 00:21:05.300 +00:21:01.960 --> 00:21:05.319 As you can imagine, the main purpose for this -00:21:05.300 --> 00:21:07.733 +00:21:05.320 --> 00:21:07.719 is to make debugging issues easier. -00:21:07.766 --> 00:21:10.566 +00:21:07.720 --> 00:21:10.519 If you want to report about an issue -00:21:10.600 --> 00:21:14.900 +00:21:10.520 --> 00:21:14.519 you have with a package. And if I close this, it's closed -00:21:14.900 --> 00:21:16.919 +00:21:14.520 --> 00:21:16.779 and everything's thrown away. NOTE Reindenting -00:21:16.920 --> 00:21:19.000 +00:21:16.780 --> 00:21:18.959 Last up, a nice feature I think -00:21:19.033 --> 00:21:20.933 +00:21:18.960 --> 00:21:21.199 a lot of people will appreciate is, -00:21:20.966 --> 00:21:24.300 +00:21:21.200 --> 00:21:24.239 if you are familiar with... Let's open a text buffer. -00:21:24.300 --> 00:21:30.279 +00:21:24.240 --> 00:21:30.079 The M-q key is traditionally bound to fill-paragraph. -00:21:30.280 --> 00:21:32.200 +00:21:30.080 --> 00:21:32.119 What this means is that... -00:21:32.233 --> 00:21:35.000 +00:21:32.120 --> 00:21:34.999 Let's, for example, copy this text from here -00:21:35.033 --> 00:21:40.366 +00:21:35.000 --> 00:21:40.359 and squash it all into one line. If I press M-q here, -00:21:40.400 --> 00:21:42.719 +00:21:40.360 --> 00:21:42.399 then the lines will be broken -00:21:42.720 --> 00:21:49.879 +00:21:42.400 --> 00:21:49.479 according to the fill column indicator up here. -00:21:49.880 --> 00:21:52.600 +00:21:49.480 --> 00:21:52.399 This is the traditional usage of M-q, -00:21:52.633 --> 00:21:54.200 +00:21:52.400 --> 00:21:54.119 and it still works in text-mode buffers, -00:21:54.233 --> 00:21:55.859 +00:21:54.120 --> 00:21:56.639 but in prog-mode buffers-- -00:21:55.860 --> 00:22:00.100 +00:21:56.640 --> 00:22:00.079 so any major mode inheriting prog-mode-- -00:22:00.100 --> 00:22:02.233 +00:22:00.080 --> 00:22:02.199 M-q will now by default be bound -00:22:02.266 --> 00:22:09.779 +00:22:02.200 --> 00:22:09.719 to prog-fill-reindent-defun. To summarize the point, -00:22:09.780 --> 00:22:13.433 +00:22:09.720 --> 00:22:13.479 if you are editing a string or a comment, -00:22:13.466 --> 00:22:16.039 +00:22:13.480 --> 00:22:15.919 then the comment will be filled. -00:22:16.040 --> 00:22:19.100 +00:22:15.920 --> 00:22:19.159 But if you are outside of a comment or outside of a string, -00:22:19.100 --> 00:22:23.166 +00:22:19.160 --> 00:22:22.919 then the defun or the top-level construct -00:22:23.200 --> 00:22:26.159 +00:22:22.920 --> 00:22:26.119 in the programming language will be re-indented. -00:22:26.160 --> 00:22:34.099 +00:22:26.120 --> 00:22:33.859 Let's try that out with maybe some file I have open here. -00:22:34.100 --> 00:22:38.800 +00:22:33.860 --> 00:22:38.819 If I'm in this... Let's choose some function, -00:22:38.833 --> 00:22:40.733 +00:22:38.820 --> 00:22:41.279 let's take this for example. -00:22:40.766 --> 00:22:43.959 +00:22:41.280 --> 00:22:43.879 If we followed all of this again, -00:22:43.960 --> 00:22:47.400 +00:22:43.880 --> 00:22:47.619 and I press M-q in on this paragraph, -00:22:47.433 --> 00:22:49.433 +00:22:47.620 --> 00:22:50.039 then the paragraph gets re-indented. -00:22:49.466 --> 00:22:55.800 +00:22:50.040 --> 00:22:54.859 But if I'm down here and I choose to break the indentation -00:22:55.833 --> 00:22:58.166 +00:22:54.860 --> 00:22:56.180 and then press M-q, -00:22:58.200 --> 00:23:02.333 +00:22:56.181 --> 00:23:02.399 then as you see, it practically selected the defun -00:23:02.366 --> 00:23:03.566 +00:23:02.400 --> 00:23:03.559 and re-indented everything -00:23:03.600 --> 00:23:06.959 -without having me to move the point around in the buffer. +00:23:03.560 --> 00:23:05.959 +without having need to move the point around in the buffer. -00:23:06.960 --> 00:23:08.633 +00:23:06.800 --> 00:23:08.679 So I think that's a really nice feature, -00:23:08.666 --> 00:23:11.100 +00:23:08.680 --> 00:23:11.039 which a lot of people can appreciate. -00:23:11.100 --> 00:23:17.939 +00:23:11.040 --> 00:23:17.879 It's one of those niceties which comes from time to time. NOTE Wrapping up -00:23:17.940 --> 00:23:20.633 +00:23:17.880 --> 00:23:20.679 Right, so that was my overview -00:23:20.666 --> 00:23:22.600 +00:23:20.680 --> 00:23:22.559 of what's going to be new in Emacs 30. -00:23:22.633 --> 00:23:24.400 +00:23:22.560 --> 00:23:24.359 I hope that most people could take away -00:23:24.433 --> 00:23:25.579 +00:23:24.360 --> 00:23:25.659 something from this presentation -00:23:25.580 --> 00:23:28.900 +00:23:25.660 --> 00:23:29.419 and have something to look forward -00:23:28.900 --> 00:23:31.133 +00:23:29.420 --> 00:23:31.599 to try out after upgrading. -00:23:31.166 --> 00:23:33.833 +00:23:31.600 --> 00:23:33.839 As mentioned initially, as of recording, -00:23:33.866 --> 00:23:36.566 +00:23:33.840 --> 00:23:36.939 this release has not been completed yet. -00:23:36.600 --> 00:23:38.833 +00:23:36.940 --> 00:23:38.879 If this is still not the case -00:23:38.866 --> 00:23:40.233 +00:23:38.880 --> 00:23:40.199 when you're seeing this video, -00:23:40.266 --> 00:23:43.833 +00:23:40.200 --> 00:23:43.799 please consider downloading and building Emacs 30 yourself. -00:23:43.866 --> 00:23:48.200 +00:23:43.800 --> 00:23:48.319 If you have any issues, which is always the case, -00:23:48.233 --> 00:23:56.439 +00:23:48.320 --> 00:23:56.339 please report them to using report-emacs-bug. -00:23:56.440 --> 00:23:57.907 +00:23:56.340 --> 00:23:57.740 That will pop up a mail buffer, -00:23:57.908 --> 00:23:59.600 +00:23:57.741 --> 00:23:59.519 and then you can describe your issue and send them out. -00:23:59.633 --> 00:24:01.800 +00:23:59.520 --> 00:24:01.839 All bug reports are valuable, -00:24:01.833 --> 00:24:04.433 +00:24:01.840 --> 00:24:03.999 even if they are false positives or duplicates-- -00:24:04.466 --> 00:24:05.233 +00:24:04.000 --> 00:24:05.239 it doesn't matter-- -00:24:05.266 --> 00:24:08.533 +00:24:05.240 --> 00:24:08.919 because when you take the time to submit a bug report, -00:24:08.566 --> 00:24:12.233 +00:24:08.920 --> 00:24:12.359 which describes something that's specific to your setup, -00:24:12.266 --> 00:24:16.700 +00:24:12.360 --> 00:24:16.839 which the developers might not have noticed or known about, -00:24:16.700 --> 00:24:19.133 +00:24:16.840 --> 00:24:19.079 then you are certainly helping out a lot of other people -00:24:19.166 --> 00:24:21.766 +00:24:19.080 --> 00:24:21.679 which might run into the same issue in the future. -00:24:21.800 --> 00:24:23.200 +00:24:21.680 --> 00:24:23.359 Especially with upgrades, -00:24:23.233 --> 00:24:26.566 +00:24:23.360 --> 00:24:26.559 it would be nice to figure out small problems -00:24:26.600 --> 00:24:30.800 +00:24:26.560 --> 00:24:30.879 which make upgrading difficult for some people. -00:24:30.833 --> 00:24:34.700 +00:24:30.880 --> 00:24:34.559 The ideal is, of course, to have no issues -00:24:34.700 --> 00:24:37.199 +00:24:34.560 --> 00:24:37.199 when upgrading from one version to another. -00:24:37.200 --> 00:24:39.566 +00:24:37.200 --> 00:24:41.939 Having said that, I thank you for your attention, -00:24:39.600 --> 00:24:43.766 +00:24:41.940 --> 00:24:43.120 and I'm saying goodbye. diff --git a/2024/captions/emacsconf-2024-org-update--the-future-of-org--ihor-radchenko--main.vtt b/2024/captions/emacsconf-2024-org-update--the-future-of-org--ihor-radchenko--main.vtt index 6b092bd1..9a13366b 100644 --- a/2024/captions/emacsconf-2024-org-update--the-future-of-org--ihor-radchenko--main.vtt +++ b/2024/captions/emacsconf-2024-org-update--the-future-of-org--ihor-radchenko--main.vtt @@ -1810,7 +1810,7 @@ participate in the mailing list, it's not ideal, but I can still work with this. I am on IRC, I am on Matrix, 00:35:16.006 --> 00:35:19.799 -you can ping me, it's yantar2. +you can ping me, it's yantar92. 00:35:19.800 --> 00:35:22.347 We also have monthly meetup, |