WEBVTT captioned by sachac
00:00:00.000 --> 00:00:03.800
Hi, I'm Zach and today I'll be giving
00:00:03.800 --> 00:00:05.320
a presentation on asm-blox,
00:00:05.320 --> 00:00:08.960
a programming game inspired by WebAssembly.
00:00:08.960 --> 00:00:10.840
So programming games came into prominence
00:00:10.840 --> 00:00:13.160
about a decade ago and are loved for providing
00:00:13.160 --> 00:00:14.760
interesting programming challenges
00:00:14.760 --> 00:00:17.160
without all the messiness of real world programming.
00:00:17.160 --> 00:00:19.960
I wanted to make a programming game
00:00:19.960 --> 00:00:24.880
and I decided to base it off of TIS-100,
00:00:24.880 --> 00:00:28.240
having a pretty basic UI.
00:00:28.240 --> 00:00:30.680
It seemed pretty doable in Emacs.
00:00:30.680 --> 00:00:33.160
TIS 100 is a programming game
00:00:33.160 --> 00:00:35.760
where you write a fictional assembly language
00:00:35.760 --> 00:00:37.280
into a grid of cells which can each
00:00:37.280 --> 00:00:39.480
communicate with one another,
00:00:39.480 --> 00:00:41.200
you're tasked with solving
00:00:41.200 --> 00:00:44.960
fairly simple CS 101 like problems.
00:00:44.960 --> 00:00:48.440
To mix things up a bit I decided to base
00:00:48.440 --> 00:00:49.800
the language of asm-blox off of
00:00:49.800 --> 00:00:52.520
WebAssembly, which is stack based,
00:00:52.520 --> 00:00:55.360
as opposed to TIS-100 which is registered based.
00:00:55.360 --> 00:00:59.200
Here you can see the same program
00:00:59.200 --> 00:01:01.680
written in the game TIS-100,
00:01:01.680 --> 00:01:03.960
what it looks like in asm-blox,
00:01:03.960 --> 00:01:08.040
and the original WebAssembly that it's based off of.
00:01:08.040 --> 00:01:10.640
With that said, let's get into a demo.
00:01:10.640 --> 00:01:12.240
This is the game board.
00:01:12.240 --> 00:01:14.120
It's a 4 by 3 grid.
00:01:14.120 --> 00:01:16.840
Each cell has a stack of size 4.
00:01:16.840 --> 00:01:20.280
First off, I'll show some of the stack editing commands.
00:01:20.280 --> 00:01:23.760
We can add a value with the const function.
00:01:23.760 --> 00:01:27.480
Here we're adding two values to this stack
00:01:27.480 --> 00:01:33.400
to get added, and eventually the stack gets overflowed.
00:01:33.400 --> 00:01:37.360
We can fix that as follows with the clear command,
00:01:37.360 --> 00:01:40.720
so that clears the stack.
00:01:40.720 --> 00:01:43.200
We can duplicate values on the stack.
00:01:43.200 --> 00:01:45.600
This duplicates the item at the bottom of the stack.
00:01:45.600 --> 00:01:48.880
10 gets put on, 20 gets put on,
00:01:48.880 --> 00:01:50.200
then 10 will get duplicated
00:01:50.200 --> 00:01:52.680
and put on the top of the stack.
00:01:52.680 --> 00:01:55.920
We can increment. For example, this increments
00:01:55.920 --> 00:01:58.760
the second to bottom, the second to bottom
00:01:58.760 --> 00:01:59.920
from the stack.
00:01:59.920 --> 00:02:04.400
So 10, 20, increment that, clear.
00:02:04.400 --> 00:02:07.640
That's basic stack operations.
00:02:07.640 --> 00:02:11.000
Next up, we have numeric commands.
00:02:11.000 --> 00:02:12.560
For example, here, if we add "add",
00:02:12.560 --> 00:02:14.680
it pops two values off the stack,
00:02:14.680 --> 00:02:17.080
adds them, and pushes the result on.
00:02:17.080 --> 00:02:20.680
Another way we can write this is as follows.
00:02:20.680 --> 00:02:22.480
We can have the add here
00:02:22.480 --> 00:02:26.400
and then nest the two constants,
00:02:26.400 --> 00:02:28.520
and then this does the same thing.
00:02:28.520 --> 00:02:31.720
First, the inner constant operations run,
00:02:31.720 --> 00:02:35.520
and then the outer add operation runs.
00:02:35.520 --> 00:02:40.280
We can nest as deeply as we want.
00:02:40.280 --> 00:02:44.680
There's also subtraction, multiplication, and whatnot.
00:02:44.680 --> 00:02:46.480
Next up are Boolean operations.
00:02:46.480 --> 00:02:49.080
Zero counts as true.
00:02:49.080 --> 00:02:51.720
Anything else--sorry, zero counts as false.
00:02:51.720 --> 00:02:52.760
Anything else is true.
00:02:52.760 --> 00:03:01.840
For example, this would give us false and true,
00:03:01.840 --> 00:03:04.040
so that result should be false.
00:03:04.040 --> 00:03:06.120
Zero gets put on the stack,
00:03:06.120 --> 00:03:08.160
one gets put on, and then the "and" operation.
00:03:08.160 --> 00:03:12.840
So there's also or, not,
00:03:12.840 --> 00:03:17.760
and various numerical comparison operations
00:03:17.760 --> 00:03:21.400
like greater than and less than.
00:03:21.400 --> 00:03:22.880
Next up are the port operations.
00:03:22.880 --> 00:03:27.320
We can send values to other cells as follows.
00:03:27.320 --> 00:03:29.600
Here we create a value
00:03:29.600 --> 00:03:33.640
and then send it right.
00:03:33.640 --> 00:03:35.040
Let's run this.
00:03:35.040 --> 00:03:37.480
The 10 goes on the stack,
00:03:37.480 --> 00:03:38.480
and then it gets sent to the right.
00:03:38.480 --> 00:03:41.360
Here it's waiting for this cell to pick it up.
00:03:41.360 --> 00:03:44.360
It can pick it up just as follows.
00:03:44.360 --> 00:03:47.480
So left... and then why don't we have it
00:03:47.480 --> 00:03:49.520
drop that value after it gets it.
00:03:49.520 --> 00:03:53.920
So the 10 gets sent to the right.
00:03:53.920 --> 00:04:00.240
This one picks it up and drops it.
00:04:00.240 --> 00:04:03.200
Lastly, we have control flow,
00:04:03.200 --> 00:04:04.280
which is a bit tricky,
00:04:04.280 --> 00:04:06.880
but with this visual,
00:04:06.880 --> 00:04:08.440
it helps explain it.
00:04:08.440 --> 00:04:12.280
There are two block constructs, "block" and "loop",
00:04:12.280 --> 00:04:16.880
and there's two jumping constructs, "br" and "brif".
00:04:16.880 --> 00:04:23.120
So if "loop" is jumped to,
00:04:23.120 --> 00:04:25.360
the control flow goes to the beginning,
00:04:25.360 --> 00:04:26.520
the top of the loop.
00:04:26.520 --> 00:04:28.640
If a block is jumped to,
00:04:28.640 --> 00:04:31.520
it goes to the end of the block,
00:04:31.520 --> 00:04:33.640
and these various blocks
00:04:33.640 --> 00:04:36.520
are identified by their level of nestedness.
00:04:36.520 --> 00:04:40.640
From the point of view of this jump statement,
00:04:40.640 --> 00:04:45.160
this "br" statement, this is block level 0,
00:04:45.160 --> 00:04:46.440
this is 1, this is 2.
00:04:46.440 --> 00:04:49.560
So here, "br 1" would be referring to this loop.
00:04:49.560 --> 00:04:51.080
What this [br 1] would do is,
00:04:51.080 --> 00:04:54.000
it would jump to this loop right here.
00:04:54.000 --> 00:04:57.360
If we were to do this [br 2], what this would do is,
00:04:57.360 --> 00:05:02.680
this would jump past this block right here.
00:05:02.680 --> 00:05:09.880
So as another example, this right here,
00:05:09.880 --> 00:05:15.720
this is a loop that generates increasing numbers.
00:05:15.720 --> 00:05:22.640
Let's see. Next up, we have modules.
00:05:22.640 --> 00:05:26.280
This is an example of a stack module.
00:05:26.280 --> 00:05:28.760
In addition to stack, there's also heaps.
00:05:28.760 --> 00:05:34.560
What this does is it allows us to create
00:05:34.560 --> 00:05:38.080
an extra stack that we can push and pop items onto.
00:05:38.080 --> 00:05:41.240
This one can have as large size as we need.
00:05:41.240 --> 00:05:43.800
Here it has a size of 20.
00:05:43.800 --> 00:05:46.400
It's taking values from up
00:05:46.400 --> 00:05:51.080
and exposing those values on the left.
00:05:51.080 --> 00:05:57.080
This loop right here, it generates numbers,
00:05:57.080 --> 00:05:59.160
and it's putting them onto the stack.
00:05:59.160 --> 00:06:00.920
We can see here that those numbers
00:06:00.920 --> 00:06:03.200
are being exposed to this cell right here.
00:06:03.200 --> 00:06:07.040
It's just taking values, and eventually,
00:06:07.040 --> 00:06:11.200
it's going to overflow and cause an error.
00:06:11.200 --> 00:06:14.480
That finishes the basic commands.
00:06:14.480 --> 00:06:16.480
Why don't we try solving this puzzle.
00:06:16.480 --> 00:06:21.320
The puzzle description is right here.
00:06:21.320 --> 00:06:23.280
We want to read a value from I.
00:06:23.280 --> 00:06:28.480
Send 1 to G if I is greater than 0.
00:06:28.480 --> 00:06:30.800
Send 1 to E if it's equal to 0.
00:06:30.800 --> 00:06:32.440
Send 1 to L if it's less than 0.
00:06:32.440 --> 00:06:35.360
And then all the other ones, we send 0 to.
00:06:35.360 --> 00:06:40.920
First things first, let's send the value we get
00:06:40.920 --> 00:06:44.400
from the input down as follows.
00:06:44.400 --> 00:06:49.680
Let's send that value right.
00:06:49.680 --> 00:06:51.240
You get from up.
00:06:51.240 --> 00:06:54.320
Okay. So next, we're getting a value on the left.
00:06:54.320 --> 00:06:58.040
Now we want to compare if this number is greater than 0.
00:06:58.040 --> 00:06:59.800
If it's greater than 0, we send 1 to G.
00:06:59.800 --> 00:07:03.280
Let's perform the greater than operation
00:07:03.280 --> 00:07:08.080
on that item we just got, and we're comparing it to 0.
00:07:08.080 --> 00:07:11.680
Now that result, we're going to send down,
00:07:11.680 --> 00:07:13.880
and we're going to send this original value
00:07:13.880 --> 00:07:16.880
we got from here to the right.
00:07:16.880 --> 00:07:19.000
Here, we do a similar step.
00:07:19.000 --> 00:07:20.240
We get the value from the left,
00:07:20.240 --> 00:07:22.920
but this time, we have to do an equal operation.
00:07:22.920 --> 00:07:25.760
Is that number we got equal to 0?
00:07:25.760 --> 00:07:28.960
We send that result down,
00:07:28.960 --> 00:07:32.880
and then send this number to the right.
00:07:32.880 --> 00:07:38.040
Lastly, we get this number from the left.
00:07:38.040 --> 00:07:42.400
Here, we need to compare if it's less than 0.
00:07:42.400 --> 00:07:45.640
We send that result down,
00:07:45.640 --> 00:07:50.280
and now lastly, we drop that remaining value.
00:07:50.280 --> 00:07:53.080
Okay, let's--oh, and then lastly,
00:07:53.080 --> 00:07:56.040
we need to send down the value we get up.
00:07:56.040 --> 00:08:02.560
Send down, up, send down, up.
00:08:02.560 --> 00:08:04.760
Okay, so let's try running this.
00:08:04.760 --> 00:08:08.920
Let's see. We notice that
00:08:08.920 --> 00:08:10.360
the numbers are coming in from I.
00:08:10.360 --> 00:08:14.200
They're going through our various conditions
00:08:14.200 --> 00:08:18.160
and should be sending all the correct values.
00:08:18.160 --> 00:08:23.560
It looks like we're not getting any errors so far.
00:08:23.560 --> 00:08:26.680
Let's speed this up.
00:08:26.680 --> 00:08:33.040
That completes the puzzle.
00:08:33.040 --> 00:08:42.000
Now let's get into some of the implementation details.
00:08:42.000 --> 00:08:46.320
The first thing is the game loop.
00:08:46.320 --> 00:08:50.560
The game loop is... So this is actually extremely simple.
00:08:50.560 --> 00:08:52.320
All the state for the entire game
00:08:52.320 --> 00:08:54.400
is stored in just a few variables.
00:08:54.400 --> 00:08:56.480
There's one variable storing
00:08:56.480 --> 00:09:01.400
the text of each cell as a vector of strings.
00:09:01.400 --> 00:09:06.280
There's a single function
00:09:06.280 --> 00:09:09.080
that renders the entire game, the entire board.
00:09:09.080 --> 00:09:11.120
There's a single function that would render
00:09:11.120 --> 00:09:13.920
this entire screen based off of the state,
00:09:13.920 --> 00:09:19.240
and then the game waits for you to press a key.
00:09:19.240 --> 00:09:24.120
The key usually, depending on what action you perform,
00:09:24.120 --> 00:09:27.040
updates the state and causes a re-render.
00:09:27.040 --> 00:09:29.360
It's an extremely simple game loop,
00:09:29.360 --> 00:09:32.800
but it makes implementing it pretty easy.
00:09:32.800 --> 00:09:35.200
To demonstrate how this game loop works,
00:09:35.200 --> 00:09:38.400
I have a simple demo prepared.
00:09:38.400 --> 00:09:41.880
This is a game of tic-tac-toe.
00:09:41.880 --> 00:09:44.800
Let me show this real fast.
00:09:44.800 --> 00:09:49.200
It's an extremely simple implementation,
00:09:49.200 --> 00:09:51.465
but it follows the same principles
00:09:51.466 --> 00:09:53.600
that I used in asm-blox.
00:09:53.600 --> 00:09:57.680
First, we have the state defined in variables.
00:09:57.680 --> 00:09:59.560
Here we have two pieces of state.
00:09:59.560 --> 00:10:01.600
We have which player's turn it is
00:10:01.600 --> 00:10:03.120
and the state of the game board.
00:10:03.120 --> 00:10:06.640
The player turn can be nil if it's empty,
00:10:06.640 --> 00:10:08.760
the string "x" or the string "o".
00:10:08.760 --> 00:10:14.240
Then the game board is a list of nine board elements.
00:10:14.240 --> 00:10:16.960
So that's the state.
00:10:16.960 --> 00:10:18.120
Then we have a helper function.
00:10:18.120 --> 00:10:19.440
You can go into the details,
00:10:19.440 --> 00:10:21.000
but it just returns true
00:10:21.000 --> 00:10:25.600
if the board has a winning player.
00:10:25.600 --> 00:10:30.040
Part two is the rendering function.
00:10:30.040 --> 00:10:32.800
Only based off of the game state,
00:10:32.800 --> 00:10:36.720
we have a function that erases the buffer
00:10:36.720 --> 00:10:40.280
and draws this from scratch.
00:10:40.280 --> 00:10:45.320
That's this part right here.
00:10:45.320 --> 00:10:46.720
Lastly, we have the action.
00:10:46.720 --> 00:10:51.920
We have one action which is bound to RET,
00:10:51.920 --> 00:10:55.840
and it places a player token.
00:10:55.840 --> 00:10:59.920
Once it places a player token,
00:10:59.920 --> 00:11:03.120
it rerenders the board,
00:11:03.120 --> 00:11:06.880
and all the rerendering is handled by this function.
00:11:06.880 --> 00:11:12.480
Then we have just creating of the mode
00:11:12.480 --> 00:11:14.680
and initialization function.
00:11:14.680 --> 00:11:16.680
With these three steps
00:11:16.680 --> 00:11:20.640
it clearly separates out all of the state,
00:11:20.640 --> 00:11:22.960
the rendering, and the actions,
00:11:22.960 --> 00:11:25.880
and it makes implementing it very simple.
00:11:25.880 --> 00:11:29.640
One trick that's used here and that I use
00:11:29.640 --> 00:11:32.382
in my asm-blox game is that
00:11:32.383 --> 00:11:33.316
when I render the board,
00:11:33.317 --> 00:11:40.800
I propertize the text to contain extra information.
00:11:40.800 --> 00:11:45.080
For example, here, each cell has
00:11:45.080 --> 00:11:49.400
a tic-tac-toe index to indicate which number cell it is.
00:11:49.400 --> 00:11:53.640
This has index 0, 1, 2, all the way up to 8.
00:11:53.640 --> 00:11:58.640
That way, for placing, the only thing it has to do
00:11:58.640 --> 00:12:01.200
is just look at its position
00:12:01.200 --> 00:12:04.960
based off of the text property.
00:12:04.960 --> 00:12:07.800
It makes implementation extremely simple.
00:12:07.800 --> 00:12:14.360
Next up, we have the implementation of the code cells.
00:12:14.360 --> 00:12:16.960
If you notice, here it's kind of weird
00:12:16.960 --> 00:12:21.000
how it's like a buffer, but each cell kind of acts
00:12:21.000 --> 00:12:25.760
like its own buffer, and it has its own limits.
00:12:25.760 --> 00:12:27.600
All of the Emacs editing--
00:12:27.600 --> 00:12:30.760
well, some of the Emacs editing commands kind of work,
00:12:30.760 --> 00:12:35.360
like beginning-of-line, end-of-line, end-of-buffer.
00:12:35.360 --> 00:12:38.240
How is that done?
00:12:38.240 --> 00:12:41.760
Well, it's all just a trick, actually.
00:12:41.760 --> 00:12:47.280
Each cell has text properties of which line it's at
00:12:47.280 --> 00:12:48.800
and its cell coordinates.
00:12:48.800 --> 00:12:54.360
Whenever a key is pressed for editing, moving lines--
00:12:54.360 --> 00:12:58.360
there's even kind of more complicated things
00:12:58.360 --> 00:13:00.600
like switching cells around--
00:13:00.600 --> 00:13:03.360
so all of that,
00:13:03.360 --> 00:13:05.200
it knows which position it's in,
00:13:05.200 --> 00:13:08.080
it knows what cell it's in,
00:13:08.080 --> 00:13:12.880
and then it copies the text of the cell,
00:13:12.880 --> 00:13:16.320
because remember, the contents of the cell
00:13:16.320 --> 00:13:18.360
are stored in internal state.
00:13:18.360 --> 00:13:23.000
It copies that cell contents into a temporary buffer.
00:13:23.000 --> 00:13:27.960
It then moves the point to whichever line it was
00:13:27.960 --> 00:13:31.160
in the game board.
00:13:31.160 --> 00:13:33.000
It performs the action.
00:13:33.000 --> 00:13:36.200
It makes sure that the resulting text isn't
00:13:36.200 --> 00:13:40.160
longer than the cell width or the cell height.
00:13:40.160 --> 00:13:42.040
If everything checks out,
00:13:42.040 --> 00:13:45.120
it updates the state and calls a re-render.
00:13:45.120 --> 00:13:48.440
So there's nothing going on in here
00:13:48.440 --> 00:13:51.080
that's, like, actually inserting a letter A.
00:13:51.080 --> 00:14:00.920
It's all updating the state and causing a re-render.
00:14:00.920 --> 00:14:03.640
So this makes things like certain
00:14:03.640 --> 00:14:06.480
internal Emacs editing constructs
00:14:06.480 --> 00:14:09.120
pretty hard to use, like undoing.
00:14:09.120 --> 00:14:12.200
Normally the undoing construct
00:14:12.200 --> 00:14:15.120
works off the contents of the buffer.
00:14:15.120 --> 00:14:17.840
But if your buffer is actually just
00:14:17.840 --> 00:14:20.080
a reflection of the internal state,
00:14:20.080 --> 00:14:21.440
then how does undoing work?
00:14:21.440 --> 00:14:24.880
Well, it pretty much is kind of a hack.
00:14:24.880 --> 00:14:27.040
I mean, undoing is here,
00:14:27.040 --> 00:14:32.680
but it's pretty much redone
00:14:32.680 --> 00:14:37.560
in a not so configurable, not so modifiable way.
00:14:37.560 --> 00:14:40.080
Pretty much everything is like that,
00:14:40.080 --> 00:14:42.440
from these parentheses highlighting...
00:14:42.440 --> 00:14:46.320
Normally, parentheses highlighting
00:14:46.320 --> 00:14:47.243
would be kind of weird,
00:14:47.244 --> 00:14:49.840
with cross-line parentheses and everything.
00:14:49.840 --> 00:14:52.360
All of that had to be redone.
00:14:52.360 --> 00:14:58.160
Another point about how this is implemented
00:14:58.160 --> 00:15:02.360
is the assembly text to executable code.
00:15:02.360 --> 00:15:05.800
If you're familiar with WebAssembly
00:15:05.800 --> 00:15:10.720
you might have encountered a tool wat-wasm.
00:15:10.720 --> 00:15:16.440
It basically converts the WebAssembly text format
00:15:16.440 --> 00:15:18.280
to byte code.
00:15:18.280 --> 00:15:22.440
And what I do here... It goes through a similar process.
00:15:22.440 --> 00:15:28.000
Normally, when you're writing this text format,
00:15:28.000 --> 00:15:30.360
you can nest things as deeply as you want.
00:15:30.360 --> 00:15:33.800
Basically, what happens is it flattens out everything.
00:15:33.800 --> 00:15:35.920
It kind of knows the order
00:15:35.920 --> 00:15:38.160
that all these things are going to get executed,
00:15:38.160 --> 00:15:40.680
and then it puts it into one single line
00:15:40.680 --> 00:15:44.120
that it can just run through and execute.
00:15:44.120 --> 00:15:48.360
The same thing for the loops and blocks.
00:15:48.360 --> 00:15:52.240
It internally generates labels and jump statements.
00:15:52.240 --> 00:15:58.640
So that concludes this presentation.
00:15:58.640 --> 00:15:59.666
Thank you for listening,
00:15:59.667 --> 00:16:07.440
and I hope you enjoy the rest of the conference.