# [[elisp:(progn (memoize 'emacsconf-get-talk-info "5 seconds") (org-md-export-to-markdown) (memoize-restore 'emacsconf-get-talk-info))][Export this file to Markdown]] #+TAGS: emacsconf # [[elisp:(memoize 'emacsconf-get-talk-info "5 seconds")][Memoize emacsconf-get-talk-info]] - [[elisp:(memoize-restore 'emacsconf-get-talk-info)][Unmemoize]] #+todo: TODO(t) SOMEDAY STARTED INPROGRESS(i) WAITING(w) STANDBY(s) BLOCKED(b) | DONE(x) CANCELLED(c) #+OPTIONS: h:6 toc:nil num:nil ':t #+PROPERTY: header-args :results silent :exports code :tangle yes #+EXPORT_FILE_NAME: ../organizers-notebook.md #+PROPERTY: QUANTIFIED Emacs #+begin_export md [[!sidebar content=""]] This file is automatically exported from [/organizers-notebook/index.org](/organizers-notebook/index.org). You might prefer to navigate this as an Org file instead. To do so, [clone the wiki repository](https://emacsconf.org/edit/). This document is the general organizers' notebook that can be used as a starting point each year. For specific years, see: - [2024](/2024/organizers-notebook) - [2023](/2023/organizers-notebook) - [2022](/2022/organizers-notebook) - [2021](/2021/organizers-notebook) - [2020](/2020/organizers-notebook) - [2019](/2019/organizers-notebook) #+end_export #+TOC: headlines 2 * Starting up the conference planning process :PROPERTIES: :CUSTOM_ID: starting-up-the-conference-planning-process :END: Check in with core organizers from the previous year to see who's in. ** Create the private repository :PROPERTIES: :CUSTOM_ID: starting-up-the-conference-planning-process-create-the-private-repository :END: This repository will store submissions, contact information, etc. 1. Create the repository on ~front0~. Ex: #+begin_src sh :eval no sudo su - git cd repositories mkdir emacsconf-2024-private.git cd emacsconf-2024-private.git git init --bare #+end_src 2. Edit ~gitolite-admin/config/gitolite-conf~. Add lines for the group and the repo. Commit and push. Ex: #+begin_example @emacsconf-2024-org = bandali sachac ... repo emacsconf-2024-private RW+ = @admins @emacsconf-2024-org orga #+end_example 3. Clone the private repository into the appropriate location. ~git clone git@git.emacsconf.org:emacsconf-2024-private private~ ** Create the public organizers' notebook in the wiki :PROPERTIES: :CUSTOM_ID: starting-up-the-conference-planning-process-create-the-public-organizers-notebook-in-the-wiki :END: Ex: 2024/organizers-notebook/index.org * Phases and lessons learned :PROPERTIES: :CUSTOM_ID: phases-and-lessons-learned :END: ** Draft CFP :PROPERTIES: :CUSTOM_ID: phases-and-lessons-learned-draft-cfp :END: Create linked pages - [ ] year index - [ ] volunteer page - [ ] submit page *** How to mark pages as drafts Put inside double square brackets: =!template id=pagedraft= *** Previous years [[file:~/proj/emacsconf/wiki/2023/cfp.org][2023]] *** Lessons learned :PROPERTIES: :CUSTOM_ID: draft-cfp-lessons-learned :END: - Maybe incentivize proper timezone specification by saying we can translate times to their local time? - Make sure to include cfp.org as an attachment instead of inline - bandali likes having the commitment to freedom section in the CFP as a form of activism. - Ask for public e-mail or contact information, IRC handle in CFP. - Nudge everyone towards 5/10 or 20 minutes, and consider < or > on a case-by-case basis. - In previous years, we offered 40 minutes as a regular choice, but that was difficult because we had to figure out how to squeeze lots of talks into the schedule and we didn't know what could be shortened. In 2022, we asked people to provide quick outlines for 10-, 20-, and 40-minute formats if they wanted a long talk slot, which was helpful in prioritizing. In 2023, we just suggested 5/10 and 20-minute slots knowing that there would probably be plenty of time for Q&A, with some longer talks approved on a case-by-case basis. Because talks are (ideally) prerecorded, 20 minutes seems to be a good length to get into something interesting while leaving time for Q&A so that people could dive deeper into particular things that interested them. - Rolling acceptances were very nice. We gave people a week to respond, which felt a little quick sometimes, but gave people enough time to speak up to see if they had any red flags or suggestions. - We didn't extend the CFP period in 2023, great! - Two streams worked out well. Sunday morning had network congestion issues, so keep an eye out for those. - It’s easier for us to extend beyond 5pm than to go before 9am (especially for Pacific time). Extending beyond 5pm puts strain on European organizers and volunteers, though. - Put the speaker introduction right after the talk description for easier web page copying. ** Announce - Post CFP to emacsconf-discuss, reddit.com/r/emacs, and in Emacs News - Submit to https://foss.events/ ** Process proposals 1. In the private repository, create a conf.org. 2. Set ~emacsconf-org-file~ to its location. 3. Create a heading for Submissions and set ~CUSTOM_ID~ to ~submissions~. 4. Prepare the ~prepare~ and ~submit~ pages on the wiki. When proposals come in: 1. Acknowledge with an e-mail along the lines of: #+begin_example Hello, ....! We'll wait another week in case anyone else wants to chime in before I add it to the wiki and send further notes. :) Thanks for submitting this! #+end_example 2. Use ~emacsconf-mail-add-submission~ if it works, or create the entry and paste it in. ~org-toggle-item~ can help convert Org-style headings into a nested list. 3. Set the following fields (~my/org-set-property~ can be helpful): EMERGENCY, Q_AND_A, AVAILABILITY, NAME, PRONOUNS, TIME, SLUG, EMAIL, NAME_SHORT, CUSTOM_ID, TRACK, TIMEZONE, CATEGORY, DATE_SUBMITTED, PUBLIC_EMAIL ** Accept proposals Setup: 1. Create YYYY/talks.md. For each talk: 1. Set up "Talk abstract" and "Talk details" sections in the conf.org talk subtree. 2. Change status to ~TO_CONFIRM~. 3. Create wiki page with ~emacsconf-publish-add-talk~. 4. Use ~emacsconf-publish-info-pages~ and ~emacsconf-publish-schedule~ as needed. 5. Send acceptance e-mail with ~emacsconf-mail-accept-talk~ ** Draft schedule :PROPERTIES: :CUSTOM_ID: draft-schedule :END: - Create entries for opening and closing remarks - FIXED: t - SCHEDULED - TIME: 10 - BUFFER: 0 - CUSTOM_ID: - SLUG: - Q_AND_A: pad - Create draft-schedule section in the public organizers notebook for the year - Add missing items to plan ** Set up backstage and upload See [[emacsconf-ansible:README.org]]. Lessons learned: - Next year, let's get upload.emacsconf.org in place as the domain name so that people don't try to FTP files to it. ** Post the schedule - [[elisp:(setq emacsconf-publishing-phase 'schedule)]] - elisp:emacsconf-publish-info-pages - elisp:emacsconf-publish-schedule-org-files - elisp:emacsconf-ical-generate-all - Update talks.md to refer to watch.md as well ** Process uploaded files Basic setup: 1. Set up the media server and symlinks: [[emacsconf-ansible:README.org]] (Media). 2. Set up the prerec processing areas on res: [[emacsconf-ansible:README.org]] (Processing prerecs). 2. Set up the caption processor on res: [[emacsconf-ansible:README.org]] (Captioning). Process: 1. Review uploaded files with elisp:emacsconf-upload-dired 2. Open the JSON for the file you want to process and use elisp:emacsconf-upload-copy-from-json . If more than one file uses the same extension, provide a suffix to disambiguate them. 3. On res: 1. Create a directory ~/current/files/$slug. 2. Copy the uploaded file from ~/cache as =$video_slug--original.$extension=, or use =rename-original.sh $slug $file=. 3. Call =process-prerec.sh $file=. 4. When the screens are finished, do locally: 1. update-cache on my computer. 2. elisp:emacsconf-publish-cache-video-data or elisp:emacsconf-cache-all-video-data 3. elisp:emacsconf-publish-backstage-index ** Generate assets *** In-between pages - Make the $year/assets/in-between directory and copy the template.svg from the previous year. - elisp:emacsconf-stream-generate-in-between-pages *** Intros - In an empty VTT file, elisp:emacsconf-subed-intro-subtitles - Record the audio and get captions - Splice together into a file that will be processed with subed-record-compile-video. ** Prepare the infrastructure Checklist: - [ ] IRC - [ ] Manual announcements - [ ] Automated announcements - [ ] Web conference - [ ] Streaming assets - [ ] Overlays - [ ] Intros - [ ] OBS - [ ] VNC - [ ] Publishing to the wiki - [ ] Publishing to the media server - [ ] Etherpad - [ ] Mumble - [ ] Icecast ** Getting ready for captions Onboarding: - Add captioner to conf.org with the ~:caption:~ tag, under a Volunteers heading with the ~volunteer~ tag. Make sure the ~EMAIL~ property is set. - Add captioner to emacsconf-org mailing list. - Send backstage information elisp:emacsconf-mail-backstage-info-to-volunteer . (Can be sent to all captioning volunteers with elisp:emacsconf-mail-backstage-info-to-captioning-volunteers) ** Getting ready for the conference :PROPERTIES: :CUSTOM_ID: pre-conf :END: elisp:emacsconf-pad-prepopulate-shift-hyperlists *** TODO Send check-in details, schedule update, etc. SCHEDULED: <2024-11-30 Sat> :PROPERTIES: :CREATED: [2024-11-27 Wed 17:34] :END: *** Two days before the conference Go through the :tminustwo: tags. *** One day before the conference Go through the :tminusone: tags. ** During the conference :PROPERTIES: :CUSTOM_ID: conf :END: elisp:emacsconf-pad-open-shift-hyperlist ** After the conference *** Capture stats 2024 stats Saturday: gen: 177 peak + 14 peak lowres dev: 226 peak + 79 peak lowres Sunday: gen: 89 peak + 10 peak lowres meet peak 409% CPU (100% is 1 CPU), average 69.4% front peak 70.66% CPU (100% is 1 CPU) live peak 552% CPU (100% is 1 CPU) average 144% res peak 81.54% total CPU (each OBS ~250%), mem 7GB used so far we have used 1.2TB of transfer this month *** Back up the data **** Icecast rsync -avze ssh live:'/data/emacsconf-2024-*' media:~/2024 rsync -avze ssh live:'/data/emacsconf-2024-*' . **** BigBlueButton rsync -avze ssh root@bbb:/var/bigbluebutton/ bigbluebutton/ ssh root@66.175.208.243 'dd if=/dev/sda bs=5M ' | dd of=bbb-img-2024-12-08.img status=progress The img can be loaded with sudo losetup --find --show bbb-img-2024-12-08.img sudo mount /dev/loop10 test cd test ***** Reviewing all the Q&A durations and chat messages #+begin_src emacs-lisp :eval no (let ((default-directory "/home/sacha/proj/emacsconf/2024/backups/bigbluebutton/published/video")) (mapconcat (lambda (dir) (let ((chat (xml-parse-file (expand-file-name "video.xml" dir))) (metadata (xml-parse-file (expand-file-name "metadata.xml" dir)))) (concat "- " (dom-text (car (dom-by-tag metadata 'meetingName))) " (" (format-seconds "%.2h:%z%.2m:%.2s" (/ (string-to-number (dom-text (dom-by-tag metadata 'duration))) 1000)) ")" "\n" (if (dom-by-tag chat 'chattimeline) (mapconcat (lambda (node) (concat " - " (dom-attr node 'name) ": " (dom-attr node 'message) "\n")) (dom-by-tag chat 'chattimeline) "") "") "") ) ) (directory-files "." nil "-")) ) #+end_src - Copy IRC logs to cache and therefore to backstage: (ex: 2024-12-07-emacsconf-gen.txt) *** Combine the IRC logs and the pads, and add them to the wiki (did we e-mail the speakers before or after?) *** Process the Q&A recordings and live presentations - Save answers videos as --answers.webm. - From the pad file: emacsconf-extract-copy-pad-to-wiki - update cache - Set ~QA_PUBLIC~ property to t as each Q&A gets processed. - change status to ~TO_INDEX_QA~ - emacsconf-publish-media-files-on-change - emacsconf-publish-info-pages-for-talk Indexing - emacsconf-extract-insert-note-with-question-heading - emacsconf-subed-make-chapter-file-based-on-comments - change status to ~TO_CAPTION_QA~ Also copy the YouTube comments and IRC comments emacsconf-extract-irc-anonymize-log *** Send thank-you emails to the speakers *** Write a report Sample: https://emacsconf.org/2023/report/ *** Notify emacs-discuss that the Q&A is up *** Send thank-you emails to the volunteers *** Process the lessons learned * General infrastructure ** Linode instance sizes *** Production - front0 shared Linode 32GB - live0 shared Linode 64GB - meet Dedicated CPU 16GB *** Dormant Resize disk to 25GB, copying large files to media if needed - nanode front0 - nanode live0 - delete meet after downloading all the recordings, or resize down to nanode ** Icecast :PROPERTIES: :CUSTOM_ID: icecast :END: Success: You can use [[#obs-instructions][OBS+VNC to record]], and the results can be viewed by mpv. - [X] Gen - [X] Dev Also, recordings are available in /data. New year: 1. Reprovision with #+begin_src sh :eval no ansible-playbook -i inventory.yml prod-playbook.yml --tags stream #+end_src so that the year is updated in the configuration. 2. SSH to live0.emacsconf.org and run ~/etc/init.d/emacsconf stop~. Confirm that icecast has stopped with ~ps | grep emacsconf~; if not, kill the process. Start it again with ~/etc/init.d/emacsconf start~ 3. To test, you can use FFmpeg like this for the gen stream: #+begin_src sh ffmpeg -y -f lavfi -i testsrc=size=1280x720:rate=10 -i background-music.opus \ -c:v libvpx -b:v 500K -crf 25 -b:a 128k \ -content_type video/webm "icecast://emacsconf:$EMACSCONF_ICECAST_SOURCE_PASSWORD@live0.emacsconf.org:8001/gen.webm" #+end_src For dev: #+begin_src sh ffmpeg -y -f lavfi -i testsrc=size=1280x720:rate=10 -i background-music.opus \ -c:v libvpx -b:v 500K -crf 25 -b:a 128k \ -content_type video/webm "icecast://emacsconf:$EMACSCONF_ICECAST_SOURCE_PASSWORD@live0.emacsconf.org:8001/dev.webm" #+end_src and then view it with #+begin_src sh mpv https://live0.emacsconf.org/gen.webm #+end_src ** Watching pages :PROPERTIES: :CUSTOM_ID: watch :END: Success: You can watch at https://live.emacsconf.org. - [X] https://live.emacsconf.org goes to the current year's page. - [X] gen stream works in the browser - [X] dev stream works in the browser - [X] Schedule is correct New year: 1. ansible-playbook -i inventory.yml prod-playbook.yml --tags live 2. Republish with elisp:emacsconf-publish-watch-pages. 3. Update front:/var/www/live.emacsconf.org. Set up test streams (see ffmpeg instructions from [[#icecast][Icecast]]) and then: ** VNC :PROPERTIES: :CUSTOM_ID: vnc :END: We use VNC to connect to the X servers on res.emacsconf.org so that we can stream from it. Success: - [X] Confirm that you can connect to emacsconf-gen via VNC - [X] Confirm that you can connect to emacsconf-dev via VNC Setting up - elisp:emacsconf-publish-res-index *** Instructions :PROPERTIES: :CUSTOM_ID: vnc-instructions :END: NOTE: VNC+OBS doesn't work well if you have a window manager that automatically resizes windows, like i3. Please configure your window manager so that the VNC window is not resized. 1. Install a VNC viewer on your system (ex: tigervnc-viewer). 2. Set up your local environment: - gen: ~export TRACK=gen; export TRACK_PORT=5905; export SSH_PORT=46668~ - dev: ~export TRACK=dev; export TRACK_PORT=5906; export SSH_PORT=46668~ 3. Copy the password: scp emacsconf-$TRACK@res.emacsconf.org:~/.vnc/passwd vnc-passwd-$TRACK -p $SSH_PORT 4. Forward your local ports and connect via VNC viewer to the appropriate forwarded port from your laptop: #+begin_example ssh emacsconf-$TRACK@res.emacsconf.org -N -L $TRACK_PORT:127.0.0.1:$TRACK_PORT -p $SSH_PORT & sleep 5 # Give it time to establish the tunnels xvncviewer 127.0.0.1:$TRACK_PORT -shared -geometry 1280x720 -passwd vnc-passwd-$TRACK & #+end_example If you get the following error: #+begin_example channel 2: open failed: connect failed: Connection refused CConn: End of stream CConn: The connection was dropped by the server before the session could be established. #+end_example then the VNC server hasn't started yet. You can start it with #+begin_src sh :eval no ssh emacsconf-$TRACK@res.emacsconf.org -p $SSH_PORT /home/emacsconf-$TRACK/bin/track-vnc #+end_src and then connect with: #+begin_src sh :eval no xvncviewer 127.0.0.1:$TRACK_PORT -shared -geometry 1280x720 -passwd vnc-passwd-$TRACK & #+end_src ** Streaming with OBS :PROPERTIES: :CUSTOM_ID: obs :END: Success: Confirm that you can stream - [X] gen - [X] dev New year: reprovision with #+begin_src sh :eval no ansible-playbook -i inventory.yml prod-playbook.yml --tags obs #+end_src so that the year is updated in the shell scripts. *** Instructions :PROPERTIES: :CUSTOM_ID: obs-instructions :END: 1. [[#vnc-instructions][Connect to the VNC session for the track.]] 2. Start *recording* (not streaming). If you don't see OBS when you connect, it's probably on workspace 2, so you can switch with Alt-2. If you still don't see it there, you can open a terminal with Alt-Enter and then run ~track-obs~. After you start recording, confirm that it is now broadcasting to the stream. 3. Verify with MPV on your local system: #+begin_example mpv https://live0.emacsconf.org/$TRACK.webm & #+end_example *** Icecast :PROPERTIES: :CUSTOM_ID: icecast :END: Success: You can use [[#obs-instructions][OBS+VNC to record]], and the results can be viewed by mpv. - [ ] gen - [ ] dev New year: reprovision with #+begin_src sh :eval no ansible-playbook -i inventory.yml prod-playbook.yml --tags stream #+end_src so that the year is updated in the configuration. This is on live.emacsconf.org and can be restarted with =/etc/init.d/emacsconf restart=. ** Shell scripts Success: From the commandline, hosts can: - [X] play just the intro: intro $SLUG - [X] play a file without an intro: play $SLUG - [X] play a file with an intro: play-with-intro $SLUG (hmm, this didn't show the subtitles) ah, it's because the intros need to be in the cache dir? - [X] open the Q&A for a talk: handle-qa $SLUG - [X] open the pad: pad $SLUG - [X] open BBB: bbb $SLUG - [ ] do the whole thing: handle-session $SLUG - [ ] rebroadcast the other stream: - rebroadcast gen - rebroadcast dev - [ ] control background music: music, stop-music Setup: - OBS must be streaming from the stream you're testing. [[#obs][Streaming with OBS]] - You may want to generate test assets and copy them over to the assets/stream directory. - Generate all the overlays and copy them to assets/overlays - Set up the assets/music directory ** Backstage :PROPERTIES: :CUSTOM_ID: backstage :END: Update this with elisp:emacsconf-publish-backstage-index Explanation of files: | --original.mp4/mov/webm | original file as uploaded by the speaker | | --silence.mp4/mov/webm | silence sample if uploaded by speaker | | --reencoded.webm | converted to .webm format and compressed | | --reencoded.opus | audio only | | --normalized.opus | normalized audio | | --reencoded.vtt | WhisperX captions, WebVTT format | | --reencoded.json | WhisperX word data | | --reencoded.srt | WhisperX captions, SRT format | | --reencoded.txt | WhisperX captions, plain text | | --main.vtt | edited captions | | --main--chapters.vtt | chapter markers | | --main.txt | captions as text (optional) | | --main.webm | version for streaming based on the most recent resources | Other files might also have been uploaded by the speaker, such as slides or notes. ** IRC web client Success: - [X] You can join from https://chat.emacsconf.org - [X] You can join from https://live.emacsconf.org and the channels end up as the latest ones Remember to schedule a task to ask libera.chat to increase the number of users it will accept from chat.emacsconf.org to avoid connection exhaustion errors. Message I've posted to support@libera.chat: Thank you for running libera.chat. We're looking forward to using IRC (#emacsconf-gen, #emacsconf-dev) for the discussions for the upcoming EmacsConf (Dec 7-8, https://emacsconf.org). In the past, we've needed to coordinate with Libera staff to increase the number of connections allowed from chat.emacsconf.org during conference days in order to avoid connection exhaustion errors. Is that something we can plan now or would you like me to bring it up a few days before the conference? ** Etherpad Success: - [X] pad.emacsconf.org redirects to this year's entry - [X] Each talk has its own Etherpad ** Publishing media to the server and to the wiki :PROPERTIES: :CUSTOM_ID: media :END: Start of year: 1. Set =media_protect_root= to true in Ansible =group_vars/all.yml=. 2. =ansible-playbook -i inventory.yml prod-playbook.yml --tags media= 3. Generate the index with =emacsconf-publish-update-media= Confirm by setting a submitted talk to =PLAYING= and testing with elisp:emacsconf-publish-media-files-on-change . The public media directory should have the files and the entry should be in the index. Switching it back to =TO_STREAM= and calling elisp:emacsconf-publish-media-files-on-change should remove it. *** TODO Switch public media to unprotected root before the conference :tminustwo: 1. Clear public media directory. 2. Set =media_protect_root= to false in Ansible =group_vars/all.yml=. 3. =ansible-playbook -i inventory.yml prod-playbook.yml --tags media= You can generate the index with =emacsconf-publish-update-media=. ** Automated IRC announcements Success: - [ ] When a talk starts playing, it is announced in the relevant channel ** BigBlueButton :PROPERTIES: :CUSTOM_ID: bbb :END: ssh orga@media.emacsconf.org "~/bin/bbb-before sat-open" https://media.emacsconf.org/2024/current/bbb-sat-open.html ssh orga@media.emacsconf.org "~/bin/bbb-open sat-open" After restarting, and in case of "Firefox can’t establish a connection to the server at wss://bbb.emacsverse.org/graphql." ssh root@bbb cd greenlight-v3 docker compose restart *** System audio limitations :PROPERTIES: :CUSTOM_ID: bbb-audio-limitations :END: Sharing system audio by changing the audio device to "Built-in Audio Analog Stereo" is very choppy, only gets captured in the recording if I'm using Firefox (not Chrome) AND there's at least one listener, and doesn't allow simultaneous narration from the speaker. Using pulseaudio to change the app's recording device to the audio monitor results in smoother audio (because it's pretending to be the microphone), but still doesn't allow simultaneous narration from the speaker. Combining microphone + system audio into a new virtual microphone source is probably more complicated than we want to walk speakers through. BBB says sharing system audio works only if you use Chrome on Mac OS X or Microsoft Windows (https://support.bigbluebutton.org/hc/en-us/articles/1500005315642-Can-I-play-a-video-using-screen-sharing). I tested it on Linux and sharing system audio is not an option. If you happen to know of any more elegant way to do this, I'd love to hear it. Related: https://github.com/bigbluebutton/bigbluebutton/issues/8632 *** Creating talk BBB rooms - =docker exec -it greenlight-v3 /bin/bash= - =bundle exec rails console= - =user_id = User.find_by_email("sacha@sachachua.com").id= #+begin_src emacs-lisp :results replace (mapconcat (lambda (group) (format "Room.create(user_id: user_id, name: \"%s - %s\")\n" (plist-get (cadr group) :speakers) (string-join (mapcar (lambda (talk) (plist-get talk :slug)) (cdr group))))) (emacsconf-mail-groups (emacsconf-active-talks (emacsconf-get-talk-info))) "") #+end_src - elisp:emacsconf-publish-bbb-static-redirects Print out the room IDs with #+begin_src ruby Room.all.each { |x| puts x.friendly_id + " " + x.name }; nil #+end_src *** Setting up moderator access codes *** Backing up BBB :backup: rsync -avze ssh root@bbb:/var/bigbluebutton/ bigbluebutton/ ssh root@bbb 'tar zcvf - /var/bigbluebutton /etc/bigbluebutton /root/greenlight-v3 /usr/local/bigbluebutton /usr/share/bbb-web' > bbb-backup-$(date "+%Y-%m-%d").tar.gz ssh root@bbb 'dd if=/dev/sda bs=5M ' | dd of=bbb-img-$(date "+%Y-%m-%d").img status=progress ** Manual IRC announcements Success: - [X] You can /opall, /conftopic, and /broadcast ** Low-res stream Should be automatic, handled by Icecast backup on live: - /usr/local/bin/emacsconf-lowres-gen-on-connect - /usr/local/bin/emacsconf-lowres-dev-on-connect ** Upload talks to YouTube SCHEDULED: <2024-11-30 Sat> :PROPERTIES: :CREATED: [2024-11-27 Wed 17:33] :END: [[https://studio.youtube.com/channel/UCwuyodzTl_KdEKNuJmeo99A/videos/upload?filter=%5B%5D&sort=%7B%22columnType%22%3A%22date%22%2C%22sortOrder%22%3A%22DESCENDING%22%7D][Channel videos]] #+begin_src emacs-lisp :results table replace (seq-keep (lambda (o) (when (and (string= (plist-get o :status) "TO_STREAM") (not (plist-get o :youtube))) (list (plist-get o :slug) (org-link-make-string (concat "copy:" ) "video file") (org-link-make-string (format "elisp:(emacsconf-publish-video-description \"%s\" t)" (plist-get o :slug)) "desc") (if (emacsconf-talk-file o "--main.vtt") (org-link-make-string (concat "copy:" (emacsconf-talk-file o "--main.vtt")) "sub file") "") (org-link-make-string (concat "elisp:(emacsconf-set-property-from-slug \"" (plist-get o :slug) "\" \"YOUTUBE\" (read-string \"YouTube URL: \"))" ) "save") (plist-get o :scheduled)))) (emacsconf-publish-prepare-for-display (emacsconf-get-talk-info))) #+end_src #+RESULTS: :results: | shell | [[copy:/home/sacha/proj/emacsconf/2024/cache/emacsconf-2024-shell--emacs-as-a-shell--christopher-howard--main.webm][video file]] | [[elisp:(emacsconf-publish-video-description "shell" t)][desc]] | [[copy:/home/sacha/proj/emacsconf/2024/cache/emacsconf-2024-shell--emacs-as-a-shell--christopher-howard--main.vtt][sub file]] | [[elisp:(emacsconf-set-property-from-slug "shell" "YOUTUBE" (read-string "YouTube URL: "))][save]] | <2024-12-07 Sat 13:55-14:35> | | writing | [[copy:/home/sacha/proj/emacsconf/2024/cache/emacsconf-2024-writing--emacs-writing-studio--peter-prevos--main.webm][video file]] | [[elisp:(emacsconf-publish-video-description "writing" t)][desc]] | [[copy:/home/sacha/proj/emacsconf/2024/cache/emacsconf-2024-writing--emacs-writing-studio--peter-prevos--main.vtt][sub file]] | [[elisp:(emacsconf-set-property-from-slug "writing" "YOUTUBE" (read-string "YouTube URL: "))][save]] | <2024-12-07 Sat 16:05-16:15> | | sat-close | [[copy:][video file]] | [[elisp:(emacsconf-publish-video-description "sat-close" t)][desc]] | | [[elisp:(emacsconf-set-property-from-slug "sat-close" "YOUTUBE" (read-string "YouTube URL: "))][save]] | <2024-12-07 Sat 17:00-17:10> | | links | [[copy:/home/sacha/proj/emacsconf/2024/cache/emacsconf-2024-links--unlocking-linked-data-replacing-specialized-apps-with-an-orgbased-semantic-wiki--abhinav-tushar--main.webm][video file]] | [[elisp:(emacsconf-publish-video-description "links" t)][desc]] | [[copy:/home/sacha/proj/emacsconf/2024/cache/emacsconf-2024-links--unlocking-linked-data-replacing-specialized-apps-with-an-orgbased-semantic-wiki--abhinav-tushar--main.vtt][sub file]] | [[elisp:(emacsconf-set-property-from-slug "links" "YOUTUBE" (read-string "YouTube URL: "))][save]] | <2024-12-08 Sun 09:10-09:20> | | blee | [[copy:/home/sacha/proj/emacsconf/2024/cache/emacsconf-2024-blee--about-blee-towards-an-integrated-emacs-environment-for-enveloping-our-own-autonomy-directed-digital-ecosystem--mohsen-banan--main.webm][video file]] | [[elisp:(emacsconf-publish-video-description "blee" t)][desc]] | [[copy:/home/sacha/proj/emacsconf/2024/cache/emacsconf-2024-blee--about-blee-towards-an-integrated-emacs-environment-for-enveloping-our-own-autonomy-directed-digital-ecosystem--mohsen-banan--main.vtt][sub file]] | [[elisp:(emacsconf-set-property-from-slug "blee" "YOUTUBE" (read-string "YouTube URL: "))][save]] | <2024-12-08 Sun 10:30-11:15> | | hyperbole | [[copy:/home/sacha/proj/emacsconf/2024/cache/emacsconf-2024-hyperbole--fun-things-with-gnu-hyperbole--mats-lidell--main.webm][video file]] | [[elisp:(emacsconf-publish-video-description "hyperbole" t)][desc]] | [[copy:/home/sacha/proj/emacsconf/2024/cache/emacsconf-2024-hyperbole--fun-things-with-gnu-hyperbole--mats-lidell--main.vtt][sub file]] | [[elisp:(emacsconf-set-property-from-slug "hyperbole" "YOUTUBE" (read-string "YouTube URL: "))][save]] | <2024-12-08 Sun 11:30-11:45> | | pgmacs | [[copy:/home/sacha/proj/emacsconf/2024/cache/emacsconf-2024-pgmacs--pgmacs-browsing-and-editing-postgresql-databases-from-emacs--eric-marsden--main.webm][video file]] | [[elisp:(emacsconf-publish-video-description "pgmacs" t)][desc]] | [[copy:/home/sacha/proj/emacsconf/2024/cache/emacsconf-2024-pgmacs--pgmacs-browsing-and-editing-postgresql-databases-from-emacs--eric-marsden--main.vtt][sub file]] | [[elisp:(emacsconf-set-property-from-slug "pgmacs" "YOUTUBE" (read-string "YouTube URL: "))][save]] | <2024-12-08 Sun 13:40-13:55> | | literate | [[copy:/home/sacha/proj/emacsconf/2024/cache/emacsconf-2024-literate--literate-programming-for-the-21st-century--howard-abrams--main.webm][video file]] | [[elisp:(emacsconf-publish-video-description "literate" t)][desc]] | [[copy:/home/sacha/proj/emacsconf/2024/cache/emacsconf-2024-literate--literate-programming-for-the-21st-century--howard-abrams--main.vtt][sub file]] | [[elisp:(emacsconf-set-property-from-slug "literate" "YOUTUBE" (read-string "YouTube URL: "))][save]] | <2024-12-08 Sun 14:15-14:35> | | sun-close | [[copy:][video file]] | [[elisp:(emacsconf-publish-video-description "sun-close" t)][desc]] | | [[elisp:(emacsconf-set-property-from-slug "sun-close" "YOUTUBE" (read-string "YouTube URL: "))][save]] | <2024-12-08 Sun 16:50-17:00> | :end: ** Restream to YouTube * Other process notes :PROPERTIES: :CUSTOM_ID: other :END: ** Adding another user to BBB :PROPERTIES: :CUSTOM_ID: bbb-user :END: #+begin_src ssh :eval no ssh bbb.emacsverse.org docker exec -it greenlight-v2 bundle exec rake user:create["USERNAME","EMAIL","PASSWORD","user"] #+end_src ** When a talk is added after the schedule has already been drafted - [X] Add the talk to conf.org - [X] Add the talk ID to the draft schedule - [X] Run the draft schedule block - [X] elisp:emacsconf-schedule-update-from-info - [X] elisp:emacsconf-publish-talks-json-to-files - [X] Generate pads with ~ansible-playbook -i inventory.yml prod-playbook.yml --tags pad~ - [X] elisp:emacsconf-set-file-prefixes - [X] elisp:emacsconf-update-schedule - [X] elisp:emacsconf-stream-generate-overlays - [X] elisp:emacsconf-stream-generate-test-videos - [X] ~rsync -avze ssh ~/proj/emacsconf/2024/assets/ res:/data/emacsconf/shared/2024/assets/~ - [X] Send the upload instructions - [X] Generate the intro text - [ ] Record the intro ** When a talk is cancelled :PROPERTIES: :CUSTOM_ID: cancel-talk :END: 1. Update the status to CANCELLED. Update that specific talk with elisp:emacsconf-publish-info-pages-for-talk. 2. Rejig the schedule if needed, and update with elisp:emacsconf-schedule-update-from-info 3. Update the published schedule with [[elisp:emacsconf-update-schedule]] and push the wiki. 4. Regenerate the intros (before, after). elisp:emacsconf-stream-generate-in-between-pages, then use elisp:subed-record-compile-video in the intros file. 5. Resync the cache directory. 6. Consider updating the screenshots for sat-open and sun-open. ** When a talk changes title 1. Update the title in conf.org. 2. Delete the FILE_PREFIX property. 3. Call elisp:emacsconf-set-file-prefix-if-needed. 4. Rename existing files with elisp:emacsconf-update-file-prefixes. 5. Update the intro VTT file with the new title. 6. Update the wiki page for the talk. 7. Regenerate the in-between images with elisp:emacsconf-stream-generate-in-between-pages 8. Rerecord and recompile the intro, and recompile the intro for the talk after it. 9. elisp:emacsconf-update-schedule 10. elisp:emacsconf-pad-prepopulate-hyperlists ** When a talk Q&A changes method :PROPERTIES: :CUSTOM_ID: change-talk-qa :END: 1. Update the talk property. 2. Update the schedule with [[elisp:emacsconf-update-schedule]] 3. Regenerate the intros (before, after). elisp:emacsconf-stream-generate-in-between-pages, then use elisp:subed-record-compile-video in the intros file. 4. Sync the new intros to the /data/emacsconf/shared/$YEAR/assets/intros directory. 5. Regenerate the pads: elisp:emacsconf-pad-prepopulate-all-talks 6. Regenerate talks.json: elisp:emacsconf-publish-talks-json-to-files ** When a system is down Let people know in #emacsconf and #emacsconf-org Update the status page: [[file:/ssh:orga@front0.emacsconf.org:/var/www/status.emacsconf.org/index.html]] /broadcast may also be helpful ** When we need to bring on a last-minute volunteer /backstage nick will give them the backstage credentials and links to the index ** Checking people in /checkin nick /room nick (should be automatic if live, but there just in case) ** Ansible #+begin_src sh :eval no git clone git@git.emacsconf.org:pub/emacsconf-ansible #+end_src